Blind Settings - Sony MVS-6520 User Manual

No. Parameter
2 Random
3 Angle
3
To set the partition method, press [Partition] and set
the following parameters.
No. Parameter
1 Width
2 Random
3 Angle

Blind Settings

You can set the number of rotations by blocks, the
perspective, the width and position of blocks, the direction,
the center position, and other parameters. There are two
modes: Bar and Wedge.
Applying the Blind effect
1
In the <Mode> group of the Non Linear >Blind menu
(4141.10), select [Bar] or [Wedge].
2
To make transition settings, press [Transition] and set
the following parameters.
No. Parameter
1 Rotation
2 Perspective
3
To set the partition method, press [Partition] and set
the following parameters.
When Bar was selected in step 1
No. Parameter
1 Width
2 Offset
3 Angle
When Wedge was selected in step 1
No. Parameter
4 No.
5 Phase
To set the wedge center position
When [Wedge] is selected in the <Mode> group, you can
set the wedge center position.
196
Applying Special Effects (Nonlinear Effect Settings)
Adjustment
Degree of randomness in
distance moved by each block
Direction of movement
Adjustment
Width of partition
Degree of randomness in
partition width
Partition angle
Adjustment
Number of rotations of the blocks
Degree of randomness in
distance moved by each block
Adjustment
Width of partition
Degree of randomness in
partition width
Starting angle of effect
Adjustment
Width of blocks
Partition position
1
Press [Position].
2
Set the following parameters.
No. Parameter Adjustment
1 H Horizontal center position
2 V Vertical center position
Split Settings
You can set the degree to which the image is split, the split
positions, and other parameters.
Applying the Split effect
1
In the <Mode> group of the Non Linear >Split menu
(4141.11), select the split method.
Single: Leave gaps between splits.
Double: Fill gaps between splits with the same image.
2
Set the following parameters.
Parameter group [1/2]
No. Parameter Adjustment
1 Transition H
Degree of left and right
separation
2 Transition V
Degree of top and bottom
separation
Parameter group [2/2]
No. Parameter Adjustment
1 Top Amount of movement of top
2 Left Amount of movement of left
3 Right Amount of movement of right
4 Bottom Amount of movement of bottom
To set the split position
1
Press [Position].
2
Set the following parameters.
No. Parameter Adjustment
1 H Position of left and right
separation
2 V Position of top and bottom
separation