Flying Bar Settings; Blind Settings - Sony MVS-8000X SystemMVS-7000X System User Manual

To apply the Broken Glass effect
Display the Broken Glass menu.
The functions of the knobs in the Broken Glass menu are
the same as those of the Rings menu (see page 319), with
the exception of [Direction].
To fix the direction in which shards scatter
Press [Direction], turning it on.

Flying Bar Settings

You can set the degree of transition, the degree of
randomness in the distance moved by each block, the
direction of movement, the width of the partitions, the
degree of randomness in partition width, the partition
angle, and other parameters.
To apply the Flying Bar effect
With the Flying Bars menu displayed, use the following
procedure.
1
To make transition settings, press [Transition] and set
the following parameters.
Knob Parameter
1 Transition
2 Random
3 Angle
2
To set the partition method, press [Partition] and set
the following parameters.
Knob Parameter
1 Width
2 Random
3 Angle

Blind Settings

There are two modes: Bar and Wedge. You can set the
number of rotations by blocks, the perspective, the width
and position of blocks, the direction, the center position,
and other parameters.
320
Applying Special Effects (Nonlinear Effect Settings)
Adjustment Setting values
0.000 to 100.000
Degree of
transition
–100.000 to
Degree of
randomness in +100.000
distance
moved by
each block
–8.000 to +8.000
Direction of
movement
Adjustment Setting values
Width of 0.000 to 100.000
partition
Degree of 0.000 to 100.000
randomness in
partition width
Partition angle –8.000 to +8.000
To apply the Blind effect
With the Blind menu displayed, use the following
procedure.
1
In the <Mode> group, select [Bar] or [Wedge].
2
To make transition settings, press [Transition] and set
the following parameters.
Knob Parameter Adjustment
1 Rotation Number of
rotations of
the blocks
2 Perspective Degree of
randomness in
distance
moved by
each block
3
To set the partition method, press [Partition] and set
the following parameters.
When Bar was selected in step 1
Knob Parameter Adjustment
1 Width Width of
partition
2 Offset Degree of
randomness in
partition width
3 Angle Starting angle
of effect
a) Setting for SD 4:3, SD 16:9
b) Setting for HD 4:3, HD 16:9
When Wedge was selected in step 1
Knob Parameter Adjustment
4 No
Width of
blocks
5 Phase
Partition
position
To set the wedge center position
When Wedge is selected in the <Mode> group, you can set
the wedge center position.
1
Press [Position].
2
Set the following parameters.
Knob Parameter Adjustment
1 H Horizontal
center
position
2 V Vertical
center
position
Setting values
–8.000 to +8.000
0.000 to 100.000
Setting values
0.000 to 100.000
–5.000 to
a)
+5.000
–20.000 to
b)
20.000
–8.000 to +8.000
Setting values
0.000 to 100.000
–8.000 to +8.000
Setting values
–8.000 to +8.000 a)
–32.000 to
b)
+32.000
a)
–6.000 to +6.000
–18.000 to
b)
+18.000