Selecting Dsk5 To Dsk8 In The Flexi Pad - Sony MVS-6520 User Manual

DSK1 to DSK8: Corresponding key menu >XX (where
"XX" is the last recalled page)
WIPE: Corresponding key menu >Transition >Wipe
Adjust >Pattern Select
DME WIPE: Corresponding key menu >Transition
>DME Wipe Adjust >1ch Pattern Select
KSS STOR: Snapshot >Key Snapshot >XX (where "XX"
is the last recalled page)
Selecting DSK5 to DSK8 in the Flexi
Pad
When the Flexi Pad is assigned to key operations, the
button display changes as shown in the following figure.
Example: Key adjust mode button display
ALL/KEY SHIFT button
Press the [ALL/KEY SHIFT] region selection button.
When the button is pressed, the indicator on the key
selection buttons switches between [DSK1] to [DSK4] and
[DSK5] to [DSK8].
To insert/delete DSK5 to DSK8
Select the target key in key snapshot mode and press the
[KEY ON] button in the memory recall section.
To insert or delete using auto transitions, press the [AUTO
TRNS] button.
Selecting DSK5 to DSK8 using Menu
VF Buttons
In an 8-keyer PGM/PST bank, you change the indicator in
the menu VF buttons to select DSK1 to DSK8.
Press the [KEY5-8] menu title button, turning it on.
416
8-Keyer Operation
[DSK5] to [DSK8] is displayed in the VF buttons,
allowing you to select a key.
Selecting DSK5 to DSK8 in the
Device Control Block
In an 8-keyer PGM/PST bank, you can select the
corresponding key (DSK1 to DSK8) when set to key wipe
positioner selection mode.
Key selection buttons
The operation buttons ([K1/K5] to [K4/K8]) in the device
control block can be used to select DSK5 to DSK8 by
holding down the [SHIFT] button.
For example, to select DSK5, press and hold the [SHIFT]
button and press the [K1/K5] button.
Selecting the Range of the Key Wipe
Position Adjustment
1
2
SHIFT button K1/K5 to K4/K8 buttons
Open the Engineering Setup >Panel >Config
>Trackball User Setting menu (7321.31).
In the <Wipe Pos Key Select Module> group, select
one of the following.
KEY1-4: Sets key 1 to key 4.
KEY1-8: Sets key 1 to key 8.
Notes
If [KEY1-8] is selected, you can select multiple keys
and adjust the key wipe position.
Switching button