Shotbox - Sony MVS-6520 User Manual

To execute the assigned action
For details about executing a shotbox
Shotbox Function with Cross-Point Buttons in the 2nd
Row" (p.
280).
1
Press the [UTIL/SBOX] assigned to the 1st row,
turning it on.
2
Press one of the bank switching buttons
select the bank.
These buttons correspond to banks 1 to 5 in sequence
from the left.
Notes
Banks cannot be selected on the cross-point control
block of the ICP-3000/3016.
3
Press the cross-point button to which the desired
action is assigned.

Shotbox

The term "shotbox" refers to a function whereby for each
specified region any snapshot or keyframe effect can be
recalled simultaneously.
The simultaneous recall setting data such as region names,
snapshot numbers and keyframe effect numbers are stored
in "registers." There are 99 registers for each control panel.
The previous figure shows schematically the settings in the
99 shotbox registers.
Each register may contain any combination of the regions
to which the register applies, with the snapshots or effects
to be recalled.
The Auto Run function is an attribute which can be set for
each register. When this is set to On, an effect recalled by
a shotbox operation is automatically run.
• When register 1 is executed, this recalls M/E-1 snapshot
1, User2 effect 5, and DME ch6 effect 1. For register 1,
auto run is On, and therefore the User2 and DME ch6
effects are run as soon as they have been recalled.
• When register 3 is executed, M/E-1 effect 1, P/P effect
90, and User1 effect 1 are recalled. For register 3, auto
run is Off, and therefore to run the recalled effects, press
the [RUN] button in the Flexi Pad.
Shotbox Register
1 "Executing a
Creation
You can create (save) shotbox registers using the Flexi Pad
or from the menu.
(1 p. 276), to
Creating a Shotbox Register in the
Flexi Pad
1
2
3
4
5
6
7
In the Flexi Pad, press the [SNAPSHOT] button,
turning it on.
This switches the memory recall section to snapshot
operation mode.
Specify the register number of the snapshot you want
to save in a shotbox register, and then recall it for each
region.
For details about the procedure for recalling a
1 "Recalling a snapshot" (p.
snapshot,
Press the [SHOTBOX] button, turning it on.
This switches the memory recall section to shotbox
operation mode.
Press the [EDIT ENBL] button, turning it on.
This switches the memory recall section to shotbox
editing mode.
Press the [STOR] button.
The [SNAPSHOT] button lights green.
If not lit, press the [SNAPSHOT] button to turn it on.
Notes
In shotbox editing mode, when you press the [STOR]
button, the [SNAPSHOT] button or [EFF] button
lights, to indicate that snapshot data will be saved in
the shotbox register, or that effect data will be saved.
Press the region selection button corresponding to the
snapshot region you want to save, turning it on.
Enter the shotbox register number to save with the
numeric keypad buttons.
To search for an empty register, instead of entering a
number, press the [.] (period) button.
The entered register number or corresponding register
number appears in the alphanumeric display. If the
Shotbox / Shotbox Register Creation
270).
277