Sony MVS-6520 User Manual page 350

Original image (4:3)
Setting the image position in edge crop
up-conversion mode
1
In the <Edge Crop Position> group of the Engineering
Setup >Switcher >Input >FC Adjust menu (7332.2),
press [Position], turning it on.
2
Adjust the following parameter.
No. Parameter
2 EC Position
To return the edge crop image to the center
Press [Center].
Setting the image position in letter box up-
conversion mode
1
In the <Letter Box Position> group of the Engineering
Setup >Switcher >Input >FC Adjust menu (7332.2),
press [Position], turning it on.
2
Adjust the following parameter.
No. Parameter
2 LB Position
To return the letterbox image to the center
Press [Center].
Making enhancer settings
1
In the Engineering Setup >Switcher >Input >FC
Adjust menu (7332.2), press [Enhancer], turning it on.
2
Set the following parameters.
350
Signal Input Settings
Up-converted image (16:9)
Edge Crop
Letter Box
Squeeze
Adjustment
Image position
Adjustment
Image position
Parameter group [1/2]
No. Parameter Adjustment
2 Detail Gain Adjust the edge enhancement
sharpness
3 Limiter Adjust the maximum signal level
to be added to the original signal
4 Crisp Set the amplitude value for which
a low-amplitude signal is not
emphasized
5 Level Set the luminance range for edge
Depend enhancement
Parameter group [2/2]
No. Parameter Adjustment
2 Frequency
Set the center frequency for edge
enhancement
3 H/V Ratio Set the horizontal/vertical ratio for
edge enhancement
Making detailed settings for down-
conversion
1
In the Engineering Setup >Switcher >Input >FC
Adjust menu (7332.2), select the input to which the
setting applies.
2
In the <Aspect> group, select one of the following.
Edge Crop: Crops the left and right sides of a 16:9
image to convert it to a 4:3 image.
Letter Box 13:9: Crops the left and right sides of a
16:9 image to make a 13:9 image and add black
bars at the top and bottom of the 13:9 image to
make a 4:3 image.
Letter Box 14:9: Crops the left and right sides of a
16:9 image to make a 14:9 image and add black
bars on the top and bottom of the 14:9 image to
make a 4:3 image.
Letter Box 16:9: Adds black bars on the top and
bottom of a 16:9 image to convert it to a 4:3 image.
Squeeze: Compresses a 16:9 image horizontally to
convert it to a 4:3 image.
For details about the image transformations, see the
following figure.