Metal Settings - Sony MVS-6520 User Manual

Metal Settings

Applying the Metal effect
1
Open the DME >Enhanced Video Modify >Metal
menu (4172).
2
Press [Metal], turning it on.
3
Set the following parameters.
No. Parameter
1 Mix Ratio
2 Y Clip
3 Y Gain
4 Y Offset
4
In the <Metal Mode> group, select the type of metallic
gloss.
Gold: Give a gold gloss to the input video.
Silver: Give a silver gloss to the input video.
Rainbow: Give a rainbow color gloss to the input
video.
Variable: Give a metallic gloss to the input video in a
parameter adjusted color. The following
parameters can be adjusted.
No. Parameter
2 Saturation
3 Hue
To mask the Metal effect with a selected pattern
Press [Mask] to display the Mask menu (4127)
(1 p. 189), and set the pattern type and modifiers.
Dim and Fade Settings
Notes
The dim and fade functions are not supported by the MKS-
6570 or MVE-8000A.
Applying the Dim effect
1
Open the DME >Enhanced Video Modify >Dim &
Fade menu (4173).
2
Press [Dim], turning it on.
3
Set the following parameters.
188
Applying Special Effects (Overall Signal Effects)
Adjustment
Mix amount for Metal video and
input video
Clip level of input signal Y level
Amount of gain for clip adjusted
input signal Y level
Offset added to clip and gain
adjusted input Y signal
Adjustment
Saturation
Hue
No. Parameter Adjustment
1 Start Point where dimming starts (dim
start point)
2 Gain Degree of dimming
4
Press [Flat Color] and set the parameters for the color
of the depths of the picture.
No. Parameter Adjustment
1 Luminance Luminance
2 Saturation Saturation
3 Hue Hue
Applying the Fade effect
1
Open the DME >Enhanced Video Modify >Dim &
Fade menu (4173).
2
Press [Fade], turning it on.
3
Set the following parameters.
No. Parameter Adjustment
1 Start Point where fading starts (fade
start point)
2 Gain Degree of fading
Glow Settings
Applying the Glow effect
1
Open the DME >Enhanced Video Modify >Glow
menu (4174).
2
Press [Glow], turning it on.
Notes
• On the MVE-9000, the Key Border and Glow effects
cannot be turned on at the same time. Only the one
most recently turned on is effective.
• On the MKS-6570 and MVE-8000A, the Defocus
and Glow effects or the Blur and Glow effects
cannot be turned on at the same time. Only the one
most recently turned on is effective.
3
Set the following parameters.
No. Parameter Adjustment
1 Clip Reference level for highlight
detection
2 Gain Amount of gain for highlights