Top Panel - Sony MVS-6520 User Manual

ICP-6520/6530/3000/3016 Control Panel

Top panel

ICP-6520 and ICP-
6530
ICP-3000 and ICP-
3016
POWER switch and status indicators A and B
When power is supplied to the AC IN A and B connectors
on the rear panel, the status indicators (green) light. If you
press the POWER switch under this condition, 1 lights
green and the panel turns on.
Shutting down the control panel
Press [Shutdown] in the top menu list or top menu
window, and follow the on-screen instructions. After the
menu screen goes fully black, check that the control panel
power switch indicator 1 has gone out.
You can forcibly turn off the power without shutting down
by pressing and holding the POWER switch for about five
seconds.
56
Power Supply and Connectors
Status indicators A and B
POWER switch
Notes
• If status indicator A or B does not light even when power
is supplied to the AC IN A and B connectors, there may
be a fault in the power circuits. Disconnect the cords
from the AC IN A/B connectors, and contact your Sony
service representative.
• If you force shutdown without performing shutdown
processing, setting data may not be saved.
• Shut down the control panel before turning off the AC
power supply (or disconnecting the power cord).
ICP-6520 diagram shown.
ICP-3000 diagram shown.