Sony MVS-6520 User Manual page 174

No. Parameter
1 Luminance
2 Saturation
3 Hue
When the MVE-9000 is used
In the <Border Fill> group of the Border/Crop menu
(4111), select the signal to insert in the border.
Flat Color: Single color
Mix Color: Mix color signal set in the Color Mix menu
(1 p. 183)
Ext Video: An external video signal input to the Ext IN
connector
If Flat Color is selected, adjust the following parameters.
No. Parameter
1 Luminance
2 Saturation
3 Hue
Softening the border edges
In the Border/Crop menu (4111), press [Border Soft],
turning it on, and set the following parameter.
No. Parameter
1 Soft
Crop Settings
Cropping the image
1
Open the DME >Edge >Border/Crop menu (4111).
2
Press [Crop], turning it on.
3
Set the following parameters.
Parameter group [1/2]
No. Parameter
1 H
2 V
3 All
Parameter group [2/2]
No. Parameter
1 Top
2 Left
3 Right
174
Applying Special Effects (Edge Effects)
Adjustment
Luminance
Saturation
Hue
Adjustment
Luminance
Saturation
Hue
Adjustment
Border inner softness
Adjustment
Crop positions on left and right
sides
Crop positions on top and bottom
sides
Crop positions on all sides
Adjustment
Crop position on top side
Crop position on left side
Crop position on right side
Parameter group [2/2]
No. Parameter Adjustment
4 Bottom Crop position on bottom side
Signs of numeric settings
For H, V, and All settings, the sign (+/–) of the setting
need not be considered. For example, in the case of an
H setting, the value for Left is automatically regarded
as a negative value, and the value for Right as a
positive value, to display the image. The following is
an example of these settings.
Parameter Entered value
H 1.5
–1.5
4
To soften the edges of the image, press [Edge Soft],
turning it on, and set the following parameter.
No. Parameter Adjustment
1 Soft Edge softness
Notes
Edges cannot be softened when the Crop effect is
disabled.
To specify whether to invert the crop area when
inverting the video image
In the <Invert/Crop Process> group, select either of the
following.
Crop –> Invert: Set an axis of symmetry at the center of
the input video, and invert both the desired area of
video and the crop area horizontally and vertically
around that axis of symmetry. The order of effect
application is Crop > Invert.
Invert –> Crop: Set an axis of symmetry at the center of
the input video, and invert only the desired area of
video horizontally and vertically around that axis of
symmetry. The order of effect application is Invert >
Crop.
Beveled Edge Settings
Applying a beveled edge
1
Open the DME >Edge >Beveled Edge menu (4112).
2
Press [Beveled Edge], turning it on.
3
Set the following parameters.
Setting
Left = –1.50
Right = 1.50
Left = –1.50
Right = 1.50