Setting The Dsk1 To Dsk8 Key Priority - Sony MVS-6520 User Manual

Number of DME wipes that can be used
simultaneously
For the PGM/PST bank on the MVS-6530 (3M/E
processor), you can use DME wipes in nine locations,
including eight independent key transitions, but the
conditions under which you can use DME wipes
simultaneously are the same as for the MVS-6520/3000A
(2M/E processor).
Setting the DSK1 to DSK8 Key
Priority
In an 8-keyer PGM/PST bank, you can set the priority
independently for two groups (DSK1 to DSK4, and DSK5
to DSK8).
Notes
You cannot set priority for a combination of various keys.
For example, it is not possible to set a priority sequence of
DSK1, DSK5, and DSK2.
1
Open the PGM/PST >Misc >Key Priority menu
(1473).
2
In <Higher Group>, press the button for the group you
want to be higher.
The button you pressed lights green, and this becomes
the reference group.
3
Set the reference group priority.
4
In <Lower Group>, select the other group.
5
Set the priority for the other group.
The key priority appears in the transition control block
as shown below.
414
8-Keyer Operation
CRNT
K8
K4
K7
K3
K2 K6
K1 K5
HIGH LOW
8-keyer key priority display
Inserting/Deleting DSK1 to DSK8
Using Independent Key Transitions
Buttons used for DSK5 to DSK8 operations
Buttons used for DSK1 to DSK4 operations
8-keyer transition control block
(ICP-6520/6530 PGM/PST bank)
Inserting/deleting DSK1 to DSK4
Operate in the same way as for an M/E bank.
To insert/delete DSK1 to DSK4 using cuts
Press one of the [DSK1 ON] to [DSK4 ON] buttons.
To insert/delete DSK1 to DSK4 using auto
transitions
Press one of the [DSK1 TRANS] to [DSK4 TRANS]
buttons.
Inserting/deleting DSK5 to DSK8
Press the [K5-K8 TRANS] button, turning it on.
The display changes as shown below.
NEXT
K1
K5
K 6
K2
K3 K 7
K4 K 8
HIGH LOW