Sony MVS-6520 User Manual page 120

Setting the DME wipe pattern size (Size)
For details about applicable pattern numbers, see "Size" in
"DME Wipe Pattern Variations and Modifiers"
(1 p. 114).
1
In the Key1 DME Wipe Adjust menu, press [Size],
turning it on.
2
Set the following parameter.
No. Parameter
1 Size
a) The effect size when [Size] is off is taken as 100.00%.
Adjusting the wipe pattern cropping (Crop)
1
In the <Crop Mode> group of the Key1 DME Wipe
Adjust menu, press [Crop], turning it on.
2
Set the following parameters.
Parameter group [1/2]
No. Parameter
1 H
2 V
3 All
Parameter group [2/2]
No. Parameter
1 Top
2 Left
3 Right
4 Bottom
To crop to 4:3 aspect ratio in 16:9 mode
In the <Crop Mode> group, press [4:3 Crop], turning it on.
To set the operation for DME wipe crop transition
execution
1
In the <Crop Mode> group of the Key1 DME Wipe
Adjust menu, press [Crop], turning it on.
2
In the <Crop Mode> group, press [Crop] or [4:3 Crop]
(to crop from 16:9 to 4:3 aspect ratio), turning it on.
3
In the <Crop Mode> group, press [Remove From
Begin].
120
Basic DME Wipe Setting Operations for Independent Key Transitions
Adjustment
a)
Effect size
Adjustment
Crop the left and right of the
image
("Left" value is displayed)
Crop the top and bottom of the
image
("Top" value is displayed)
Crop the top, bottom, left, and
right of the image
("Left" value is displayed)
Adjustment
Crop the top of the image
Crop the left of the image
Crop the right of the image
Crop the bottom of the image
The Remove From Begin menu (1116.7) appears.
For subsequent operations, see step 5 in
action when a DME wipe crop transition is executed"
(1 p. 118).
To set the timing of transition completion
1
In the <Crop Mode> group of the Key1 DME Wipe
Adjust menu, press [Crop], turning it on.
2
In the <Crop Mode> group, press [Remove From
Begin].
The Remove From Begin menu (1116.7) appears.
For subsequent operations, see step 3 in
timing of transition completion" (1 p.
Modifying the DME wipe pattern edge
(Edge)
1
In the <Edge> group of the Key1 DME Wipe Adjust
menu, select one of the following.
Border
Soft Border
2
Set the following parameters.
When Border is selected
No. Parameter Adjustment
1 Width Border width
3 Luminance Luminance of border color
4 Saturation Saturation
5 Hue Hue
When Soft Border is selected
No. Parameter Adjustment
1 Width Border width
2 Inner Soft Border inner softness
3 Luminance Luminance of border color
4 Saturation Saturation
5 Hue Hue
Specifying DME wipe direction
For details about the corresponding pattern number,
1 "DME Wipe Pattern Variations and Modifiers"
(p. 114).
Select one of the following in the <Direction> group of the
Key1 DME Wipe Adjust menu.
Normal: Wipes in the normal direction.
Normal/Reverse: Switches between normal and reverse
for each transition.
Reverse: Wipes in the opposite direction to normal.
"To set the
"To set the
118).