Sony MVS-6520 User Manual page 182

5
To soften the edges, press [Drop Shdw Soft], turning it
on.
Wipe Crop Settings
Notes
• The wipe crop function is not supported by the MKS-
6570 or MVE-8000A.
• When wipe crop is on, any mask that was on is turned
off.
• When brick is on, wipe crop cannot be turned on. To turn
wipe crop on, it is first necessary to turn brick off.
• When [Output] is off in the <Shaped Video> group of
the Video/Key menu (4162), unless you set [Bkgd] in the
Bkgd menu (4161) to on, the wipe crop effect will not
function.
Applying the wipe crop effect
To select the pattern
1
Open the DME >Edge >Wipe Crop menu (4116).
2
Press [Wipe Crop], turning it on.
3
Press [Pattern Select].
The Pattern Select menu (4116.1) appears.
4
From the displayed patterns (wipe patterns 1 to 24 and
304), press any pattern to select it.
In this state, you can adjust the size of the pattern (see
the next item).
To set the pattern size and position
1
In the Wipe Crop menu, press [Position/Size].
2
Set the following parameters.
No. Parameter
1 H
2 V
3 Size
5 Pattern
Notes
When pattern number 304 is selected, the effect of
settings in the <Edge> group varies with the Size
setting.
182
Applying Special Effects (Edge Effects)
Adjustment
Horizontal position
Vertical position
Pattern size
Pattern number
To invert the regions of the cropping
In the Wipe Crop menu, press [Invert], turning it on.
Setting the aspect ratio of the wipe crop
pattern (Aspect)
1
In the Wipe Crop menu (4116), press [Aspect], turning
it on.
2
Set the following parameters.
No. Parameter Adjustment
1 Aspect Aspect ratio
Rotating the wipe crop pattern (Rotation)
1
In the <Rotation> group of the Wipe Crop menu
(4116), select one of the following.
Angle: Incline the pattern through a fixed angle.
Speed: Rotate at a speed rate.
2
Depending on the selection in step 1, set the following
parameters.
When Angle is selected
No. Parameter Adjustment
Rotation angle of pattern
1 Angle
a) +1.00 is one rotation in clockwise direction.
When Speed is selected
No. Parameter Adjustment
Rotation speed of pattern
1 Speed
a) +100.00 is four rotations per second in clockwise direction.
Applying modulation to the wipe crop
pattern (Modulation)
1
In the <Modulation> group of the Wipe Crop menu
(4116), select one of the following.
H (horizontal modulation): Modulate the pattern to
apply waving in the horizontal direction.
V (vertical modulation): Modulate the pattern to
apply waving in the vertical direction.
2
Set the following parameters.
No. Parameter Adjustment
1 Amplitude Amplitude of modulation
2 Frequency Frequency of modulation
3 Speed Speed of waves
a)
a)