Cross-Point Settings - Sony MVS-6520 User Manual

For details about assignment of regions to the region
1 "Assigning Regions to Region
selection buttons,
Selection Buttons in the Flexi Pad" (p.
1
Open the Engineering Setup >Panel >Config >Multi
Function Module menu (7321.20).
2
Press one of the following three buttons displayed in
the button area.
Mode Sel Assign: Assigns a function to the mode
selection buttons
Eff Edit Assign: Assigns a function to a button in the
memory recall section for effect editing (when the
[EFF] and [EDIT ENBL] buttons are pressed)
Macro Edit Assign: Assigns a function to a button in
the memory recall section for macro editing (when
the [MCRO] and [EDIT ENBL] buttons are
pressed)
3
In the button indications on the left, press the button
for the assignment.
4
Select the mode or function to be assigned.
The following modes and functions can be selected.
• Mode selection buttons
Mode
Effect
Snapshot
Shotbox
Macro
Wipe snapshot
DME wipe snapshot
Transition rate
Key adjust
Key snapshot
• Buttons in the memory recall section during
effect editing
Function
Undo
Pause setting
Copy
Paste
Select all
Insert
Modify
Delete
Keyframe loop count setting
Effect duration setting
327).
Button indication
EFF
SNAPSHOT
5
SHOTBOX
MCRO
To cancel an assignment
WIPE
Select the corresponding button, then press [Clear].
DME WIPE
TRANS RATE
To return all button assignments to the factory
default state
KEY ADJ
Press [Default].
KEY SS

Cross-Point Settings

Button indication
UNDO
PAUS
Creating Cross-Point Assign Tables
COPY
As cross-point assign tables, you can create a "main" table
PSTE
and up to 14 other tables (table 1 to table 14). However,
ALL
you can only carry out assignment of the video and key
INS
combinations in the main table.
MOD
DEL
Creating the main table
KF LOOP
In the main table, a pair consisting of a video signal and a
EFF DUR
key signal is assigned to each button number. You can also
Function
Keyframe duration setting
Delay setting
Constant duration mode on or off
Go to specified timecode
Go to specified keyframe
Set range
The functions of the buttons in the memory recall
section during effect editing are on two pages; to set
the functions of buttons on the second page, press [2]
in the <PageSelect> group in the button area.
• Buttons in the memory recall section during
macro editing
Function
Undo
Pause setting
Auto insert mode on or off
Copy
Paste
Select all
Insert
Modify
Delete
Set range
Go to specified event
Press [Set] to confirm the setting.
Button indication
KF DUR
DLY
CNST DUR
GOTO TC
GOTO KF
FROM TO
Button indication
UNDO
PAUS
AUTO INS
COPY
PSTE
ALL
INS
MOD
DEL
FROM TO
GOTO EVNT
329
Cross-Point Settings