Sony MVS-6520 User Manual page 203

Notes
The Total Ambient function is not supported by the
MKS-6570 or MVE-8000A.
When Plane is selected
No. Parameter Adjustment
1 Light Intensity of light in highlight area
5 Brightness of whole image
Total
Ambient
When Bar is selected
No. Parameter Adjustment
1 Light Intensity of light in highlight area
2 Ambient Intensity of light in ambient area
5 Total Brightness of whole image
Ambient
When Preset is selected
No. Parameter Adjustment
1 Light Intensity of light in highlight area
2 Ambient Intensity of light in ambient area
a)
Shade
3 Intensity of light in shade area
5 Brightness of whole image
Total
Ambient
a) Setting is available when nonlinear effect Page turn, Roll, Cylinder,
or Sphere is selected.
Shade area
Highlight
area
The three regions for which the light intensity can be set
Setting the bar shape of the highlight area
When you select [Bar] or [Preset] in step 3 of
the Lighting effect" (1 p.
202), use the following
procedure to set the shape of the bar.
1
In the Lighting menu (4151), press [Light Modify],
turning it on.
2
Adjust the following parameters.
No. Parameter Adjustment
1 X X-value of bar center point
2 Y Y-value of bar center point
a)
3 Angle Angle of bar
No.
4
5
a) There are some nonlinear effects for which Angle cannot be used.
Center
point of bar
Width of
bar
Setting the color of the light in the
highlight area
1
In the Lighting menu (4151), press [Light Color],
turning it on.
2
Adjust the following parameters.
No.
1
2
3
Ambient
Setting the bar shape of the shade area
area
When you select [Preset] in step 3 of
Lighting effect" (1 p.
to set the bar shape of the shade area.
1
In the Lighting menu (4151), press [Shade Modify],
turning it on.
2
Adjust the following parameters.
"Applying
No.
1
4
5
Setting the color of the shade in the shade
area
1
In the Lighting menu (4151), press [Shade Color],
turning it on.
2
Adjust the following parameters.
Parameter Adjustment
Width Width of bar
Soft Softness of edges
Bar shape parameters
Parameter Adjustment
Luminance Luminance
Saturation Saturation
Hue Hue
"Applying the
202), use the following procedure
Parameter Adjustment
X X-value of bar center point
Width Width of bar
Soft Softness of edges
Applying Special Effects (Lighting and Recursive Effects)
Angle of bar
203