Adjusting The Zoom - Sony MVS-6520 User Manual

Multi format switcher system with icp-series control panel
Hide thumbs Also See for MVS-6520:
Table of Contents

Advertisement

Bottom Left
Bottom Right
All: All four corners
5
Adjust the position of the corner selected in step 4.
No.
Parameter
Adjustment
1
Pos X
Movement in X-axis direction
2
Pos Y
Movement in Y-axis direction
Resetting the corner positions
Press [Reset Corner].
Selecting the area used for pinning
When the foreground is cropped, press [Crop Link] in the
Corner Pinning menu (4142) to select either of the
following.
On: Use the area of the cropped image for positioning
Off: Use the area of the entire image, including the part
hidden by cropping (shaded in the diagram below) for
positioning
Area positioned by pinning
when Crop Link is On
(
The bold frame shows the area used for positioning.)
Adjusting the density of the foreground
You can adjust the density of the foreground image to be
translucent so that the background shows through, making
it easier to position the corners.
Notes
This setting is not saved in a key frame or snapshot.
1
In the Corner Pinning menu (4142), press [Video
Through], turning it on.
2
Adjust the following parameter.
No.
Parameter
Adjustment
4
Density
Image density

Adjusting the zoom

You can enlarge the image around the corner being
adjusted, to allow fine positioning of the corner.
Area positioned by pinning
when Crop Link is Off
Notes
• This setting is not saved in a key frame or snapshot.
• This function is only enabled when combine is set.
• When all four corners are being positioned, this function
cannot be used.
1
In the Corner Pinning menu (4142), press [Zoom
Enable], turning it On.
2
Adjust the following parameter.
No.
Parameter
Adjustment
5
Zoom
Degree of
zooming in on
the corners
Zoom Off
Global Effect Operations
Overview
Global effects are special effects created by combining the
images of successive channels. The Global Effect menu is
used to add these effects. The following types of global
effects are available.
Notes
The brick function cannot be used on the MKS-6570.
Effect
Description/image
Combiner Automatically combines the selected images
when multiple channels are selected on one
keyer or for one transition.
Brick
Creates a
rectangular
parallelepiped from 3
successive channels.
Setting values
1.00 to 16.00
Zoom On
219
Global Effect Operations

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents