Sony MVS-6520 User Manual page 233

Press the [RUN] button to play to a point close to the
end of a file, stop playback, then press the [RUN]
button once more.
In such cases, first recall a different register, then carry
out the following sequence:
Recall the original register again, press the [REWIND]
button, then press the [RUN] button.
Making and saving settings relating to
Cueup & Play
1
In the Flexi Pad, press the [EFF] button, turning it on.
2
Press the button corresponding to the region you want
to select, turning it on.
You can select more than one button.
For details about the method of region selection,
1 "Selecting regions in the Flexi Pad" (p.
3
Enter the number of the register to be recalled with the
numeric keypad buttons.
To search for an empty register, instead of entering a
number, press the [.] (period) button.
The entered register number or corresponding register
number appears in the alphanumeric display. If the
number is followed by a letter "e" or "E," this indicates
the following.
e: Indicates the selected register is empty for the
regions selected in step 2.
E: Indicates that the corresponding register is empty in
all selectable regions.
4
Press the [ENTR] button.
This recalls the register you specified in step 3.
5
When using the device control block, press the [DEV]
button, turning it on.
Notes
Check that the [MENU] button is not lit. If it is lit,
press to turn it off.
6
With the buttons in the device control block, select the
VTR, Extended VTR, or disk recorder for which you
want to make the setting.
You can select more than one button.
The first button pressed lights green as the reference
device, and subsequently pressed buttons light amber.
7
Set the start point.
• Using the [START TC] button:
Play the VTR, Extended VTR or disk recorder by
control from the device control block. Find the
desired start point, and press the [START TC]
button at that position.
Each time you press the button the start point
timecode is overwritten.
• Setting with the Cueup & Play menu:
Set the start point, stop point, and start delay
duration
8
Set the stop point.
Setting the start point and stop point automatically
determines the duration.
• Using the [STOP TC] button:
Play the VTR, Extended VTR or disk recorder by
control from the device control block. Find the
desired stop point, and press the [STOP TC] button
at that point.
Each time you press the button the stop point
timecode is overwritten.
247).
• Setting with the Cueup & Play menu:
Set the start point, stop point, and start delay
duration
9
To set a start delay time, press the [DELAY] button in
the device control block, and enter a value in the Flexi
Pad. Alternatively, make the setting in the Cueup &
Play menu.
If no setting is required, continue to step 10.
10
Press the [STOR] button in the Flexi Pad.
11
Enter the register number to save with the numeric
keypad buttons.
When overwriting the settings in the register recalled
in step 3, entering a number is not required.
12
Press the [ENTR] button.
Automatically running cue up and play
By recalling a register in which you have saved setting data
for Cueup & Play, you can control the VTR/Extended
VTR/disk recorder automatically in the same way as when
automatically executing a keyframe effect.
1
In the Flexi Pad, press the [EFF] button, turning it on.
2
Press the button corresponding to the region you want
to select, turning it on.
You can select more than one button.
3
Enter the number of the register to be recalled with the
numeric keypad buttons.
4
Press the [REWIND] button.
(1 p. 234)
.
(1 p. 234)
.
Control of VTRs, Extended VTRs, and Disk Recorders
233