Sony MVS-6520 User Manual page 94

Inverting black and white in the key source
[KEY INV] button: When this is set to on, black and
white in the key source is inverted.
Selecting the key fill signal
[FILL MAT] button: When this is on, the signal
generated by the dedicated color matte generator is
selected, and when it is off, the signal selected on the
key 1 fill bus is selected.
For details about parameters,
and key source" (p.
83).
Selecting the mask source
[MASK] button: Selects the mask source (box or pattern
generated by dedicated generator) to be selected in the
Main Mask menu for each M/E bank.
The parameters that can be adjusted with the adjustment
knobs are different for a box or a pattern. The box
parameters are on two pages; to access the second page,
press the [KNOB 1/2] button.
For details about parameters,
Applying modifiers to the key edge
[BDR] button: Applies a border to the edge.
[DROP BDR] button: Applies a drop border to the edge.
[SHDW] button: Applies a shadow to the edge.
The parameters that can be adjusted with the knobs are on
two pages; to access the second page, press the [KNOB 1/
2] button.
For details about parameters, see step 3 in
Modifications" (1 p.
88).
Setting the degree of edge softening
[SOFT EDGE] button: Softens the key edge.
For details about parameters, see step 6 in
Modifications" (1 p.
88).
Setting the resizer function
[RESIZR] button: Enables and disables the resizer
function.
The parameters that can be adjusted with the knobs are on
two pages; to access the second page, press the [KNOB 1/
2] button.
For details about parameters,
key shrinking, magnification, rotation, and movement"
(p. 95).
If you press the [RESIZR] button at the same time as any
of the [KEY1] to [KEY4] buttons, you can switch the
trackball to the resizer setting mode.
94
Key Adjustments (Flexi Pad)
1 "Selecting the key fill
1 "Using a mask" (p.
91).
"Key Edge
"Key Edge
1 "Menu operations for
Rotating keys
[ROT ENBL] button: Enables rotation of the key using
the resizer. Enabled when the [RESIZR] button is on.
[ROT X] button: Rotates the key around the X axis.
[ROT Y] button: Rotates the key around the Y axis.
For details about parameters,
key shrinking, magnification, rotation, and movement"
(p. 95).
Using a DME currently used on another
keyer
[OVERRIDE] button: When one DME channel is in use,
holding down this button and pressing a DME channel
button ([DME1] or [DME2]) allows you to forcibly
select this channel. The button for the selected DME
channel lights green.
Recalling the keyer using the DME channel
[TRCE] button: Holding down this button, press the
selection button for the DME channel already assigned
to another keyer or transition, to switch the keyer or
transition to which the DME channel is assigned to the
currently selected state.
Monitoring DME output
[DME MON] button: Holding down this button and
pressing the selection button for a DME channel
([DME1] or [DME2]) assigns the signal for this
channel as a reentry signal to DME MON V/K and
allows you to monitor on an AUX bus, etc. However,
it is first necessary to assign this channel on the DME
to the delegation (keyer or transition) to be monitored.
Selecting the DME channel
[DME1] and [DME2] buttons: Press one of these to
select the corresponding DME channel. The number of
valid buttons depends on the number of DME channels
in use.
Returning the key adjustment values to
their defaults
Holding down a key type button ([LUM], [LIN], [CRK], or
[WIPE PTN]) recalls the key default values.
Key modify clear
When the [KEY ADJ] button is held down, holding down
the region selection button for the selected region together
returns all the key settings of the region to the initial status
settings.
1 "Menu operations for