Sony MVS-6520 User Manual page 175

No. Parameter Adjustment
1 H Simultaneously adjust width of
left and right edges
2 V Simultaneously adjust width of
top and bottom edges
3 All
Simultaneously adjust width of all
four edges
4
In the <Edge Mode> group, select the type of edge.
Light: Effect of light striking the edge
No. Parameter Adjustment
1 Top Adjust luminance of top edge
2 Left Adjust luminance of left edge
3 Right Adjust luminance of right edge
4 Bottom Adjust luminance of bottom edge
5 All Simultaneously adjust luminance
of all four edges
Color: Colored edges. When this is selected, set the
following parameters in the <Color Adjust>
group.
• To set the density
No. Parameter Adjustment
1 Density Adjust the color density
• To set the colors for each edge (Top, Left, Right,
Bottom, All)
No. Parameter Adjustment
1 Luminance Luminance
2 Saturation Saturation
Hue
3 Hue
a) For the All adjustment, the value for Left is shown.
5
To soften the inside of the edges and the boundaries
between adjacent edges, turn on [Edge Soft], and
adjust the following parameters.
No. Parameter Adjustment
1 Inner Soft Softness of the inside of edges
2 Bound Soft Softness of the edge boundaries
Bound
Soft
a)
a)
a)
Inner
Soft
Key Border Settings
Notes
The key border function is not supported by the MKS-
6570 or MVE-8000A.
Applying key borders
1
Open the DME >Edge >Key Border menu (4113).
2
Press [Key Border], turning it on.
Notes
The key border function and Glow function
(1 p. 188) cannot be turned on at the same time. Only
the one most recently turned on is effective.
3
Set the following parameters.
No. Parameter Adjustment
1 H Simultaneously adjust width of
left and right key borders
2 V
Simultaneously adjust width of
top and bottom key borders
3 All
Simultaneously adjust width of all
four key borders
4 Soft Softness of the key borders
5 Density Density of the key borders
4
To set the key border color, press [Flat Color] and
adjust the following parameters.
No. Parameter Adjustment
1 Luminance Luminance
2 Saturation Saturation
3 Hue Hue
To select an outline only key
Press [Outline], turning it on.
Art Edge Settings
Notes
The art edge function is not supported by the MKS-6570
or MVE-8000A.
Applying art edges
1
Open the DME >Edge >Art Edge menu (4114).
Applying Special Effects (Edge Effects)
175