Keyer Operation - Sony MVS-6520 User Manual

Menu
Number Path
Engineering Setup >Switcher
7333.5
>Output >4:3 Crop
Engineering Setup >Switcher
7333.10
>Output >Multi Viewer >Source/
Output Assign
7333.11 Engineering Setup >Switcher
>Output >FC Output Select
7333.12 Engineering Setup >Switcher
>Output >Aux Mix
7334 Engineering Setup >Switcher
>Transition
7334.1 Engineering Setup >Switcher
>Transition >Preset Color Mix
Engineering Setup >Switcher
7334.2
>Transition >Transition Curve
7335 Engineering Setup >Switcher >Key/
Wipe/FM/CCR
7335.1 Engineering Setup >Switcher >Key/
Wipe/FM/CCR >Show Key
Engineering Setup >Switcher >Link
7336.2
>Internal Bus Link >Link Bus Select
7336.5 Engineering Setup >Switcher >Link
>GPI Link >GPI Link Adjust
7336.6 Engineering Setup >Switcher >Link
>M/E Link
7336.7 Engineering Setup >Switcher >Link
>Key Transition Link
Engineering Setup >Switcher
7337.2
>Device Interface >GPI Input
7337.4 Engineering Setup >Switcher
>Device Interface >GPI Output
7344.1 Engineering Setup >DME >Device
Interface >DME1 GPI Input
a) The same conditions apply to the Key2 to Key4 and DSK2 to DSK4 menus.
b) For Key3, Key4, DSK3 and DSK4, "Processed Key" is displayed instead of "Processed Key/Resizer."
c) For details about patterns that can be selected,

8-Keyer Operation

The key operation description in this User's Guide is
mainly geared to 4-keyer operation.
Using the MVS-6530 (3M/E processor), the PGM/PST
bank can be operated using eight keyers (DSK1 to DSK8).
The operations required for eight keyers are described
below.
412
8-Keyer Operation
Disabled operation/setting
Output 13 to 32 settings
• When setting the [Src No] parameter: DME Monitor Video, DME
Monitor Key, M/E-2, Primary 33 to 48 signal selection
• When setting the [Output No] parameter: Output 13 to 32 selection
Output 13 to 32 selection
Output 13 to 24 settings
M/E-2 settings
• M/E-2 settings
• [Key5] to [Key8] selection
M/E-2 settings
M/E-2 settings
[M/E2 PVW] settings
• Selection of items related to M/E-2
• Selection of items related to P/P Key5 to 8
• M/E-2 Auto Trans, M/E-2 Cut selection on video/button display
• M/E-2 bus settings on bus display
M/E-2 selection
• Selection of items related to M/E-2
• Selection of items related to P/P Key5 to 8
• [M/E-2] selection
• Selection of following items on [P/P] (x=5 to 8):
DSKx Cut, DSKx Auto Trans, DSKx SS ? Recall
• [M/E-2] selection
• Selection of following items when Trigger Type is not set to Status in
[P/P] (x=5 to 8): DSKx Cut, DSKx Auto Trans, DSKx SS ? Recall
• Selection of following items when Trigger Type is set to Status in [P/P]
(x=5 to 8): DSKx On
All menu operations
1 "Types of DME Wipe Pattern" (p.
8-keyer operation list
Type
Key signal
selection
Transitions
111).
Sections Operation
used
Cross-point Select DSK5 to DSK8
control block signals in the 2nd row.
Transition Select DSK1 to DSK8
control block using the next
transition selection
buttons.
Menu
Set the DSK1 to DSK8
key priority.
Refer
to
p. 413
p. 413
p. 414