Sony MVS-6520 User Manual page 299

Screen when the keyframe status is displayed
The keyframe status section appears as follows.
•
Menu macro register number
•
Menu macro register name
•
Current event number / total number of events
•
Remaining memory
Menu shortcut button to Menu Macro Edit menu
The Previous page button shows one of the following:
• When [Auto Insert] is on, "Menu Macro Auto Insert"
appears.
• When [Auto Insert] is off, "Menu Macro Insert After"
appears, but operates as [Insert After].
Screen when the keyframe status is not displayed
The Default Recall button shows the following.
Menu shortcut button to Menu Macro Edit menu
The Previous page button shows one of the following:
• When [Auto Insert] is on, "Menu Macro Auto Insert"
appears.
• When [Auto Insert] is off, "Menu Macro Insert After"
appears, but operates as [Insert After].
Menu Macro Register Editing
You can display the current state of a menu macro register
using the Menu Macro Register menu.
For details about the display,
(p. 264). However, region names are not displayed.
1 "Effect Status Display"
In the Menu Macro Register menu, you can do the
following editing operations on menu macro registers.
• Lock: Write-protect the contents of the menu macro
register.
• Copy: Copy the contents of one menu macro register to
another menu macro register.
• Delete: Delete the contents of a menu macro register.
• Name: Attach a name to a menu macro register.
The operations for menu macro register editing are the
same as those for effect register editing
However, it is not necessary to select a region in macro
register editing.
Macro Timeline
By recording macro recall and execute action on a
timeline, in the same way as for key frames in an effect,
you can automatically execute them in a sequence. This
timeline is called a "macro timeline," and one macro
timeline can have up to 99 macros being executed
simultaneously in parallel.
There are 99 registers in the Macro region that can be
recorded on the macro timeline, numbered 1 to 99. These
registers are distinct from the registers where individual
macros are stored.
Notes
If you use a macro timeline to superimpose more than one
macro, the macros may not be executed according to the
timing information registered in the timeline.
Available key frame functions
The following lists the key frame functions that can be
used on the macro timeline.
• RECALL (1-99), STORE (1-99), empty register search,
AUTO SAVE, RECALL MODE (RECALL, RECALL
& REWIND)
• EDIT ENABLE, EDIT UNDO
• CONST DUR, EFF DUR, KF DUR, DELAY, PAUSE,
INSERT BEFORE, INSERT AFTER, MODIFY,
DELETE, COPY, PASTE BEFORE, PASTE AFTER,
FROM TO, ALL
• PREV KF, NEXT KF, GOTO TC, GOTO KF, RUN,
REWIND, FF, STOP NEXT KF, NORMAL, JOG, KF
FADER
The following keyframe functions cannot be used.
• KF LOOP, EFFECT LOOP, REVERSE, NORMAL/
REVERSE
• PATH
(1 p. 264).
299
Macro Timeline