Sony MVS-6520 User Manual page 97

• "Interpolation Mode" cannot be set.
• The anti-moiré filter cannot be set.
Resizer Crop/Border Settings
Making a crop setting for a key for which
resizer is on
For example, to make the crop settings for key 1 of the M/
E-1 bank, use the following procedure.
1
In the M/E-1 >Key1 >Processed Key/Resizer menu
(1115), press [Resizer], turning it on.
2
In the <Resizer Effect> group, press [Border/Crop].
The Border/Crop menu (1115.2) appears.
3
Press [Crop], turning it on.
4
Set the parameters.
These settings are the same as
(1 p. 174).
Notes
If mosaic is enabled, or if defocus is enabled and you
select [Video/Key] in the <Defocus Mode> group,
then the crop is disabled.
Applying a border to a key for which
resizer is on
1
In the M/E-1 >key1 >Processed Key/Resizer menu
(1115), press [Resizer], turning it on.
2
In the <Resizer Effect> group, press [Border/Crop].
The Border/Crop menu (1115.2) appears.
3
Press [Border], turning it on.
4
Set the following parameters.
No. Parameter Adjustment
1 H Simultaneously adjust width of
left and right borders
2 V Simultaneously adjust width of
top and bottom borders
3 All Simultaneously adjust width of all
four borders
4 Density Border density
"Crop Settings"
To apply color to a border
1
In the <Border Mode> group of the Border/Crop
menu, press [Flat Color].
2
Set the following parameters.
No. Parameter Adjustment
1 Luminance Luminance
2 Saturation Saturation
3 Hue Hue
To soften the inner edge of a border
1
In the Border/Crop menu, press [Border Soft].
2
Set the following parameter.
No. Parameter Adjustment
1 Inner Soft Border inner softness
To apply a beveled light edge
1
In the <Border Mode> group of the Border/Crop
menu, press [Beveled Light Edge].
2
Set the following parameters.
No. Parameter Adjustment
1 Top Position of top side
2 Left Position of the left side
3 Right Position of the right side
4 Bottom Position of the bottom side
5 All Position of all four sides
3
Press [Border Soft].
4
Set the following parameters.
No. Parameter Adjustment
1 Inner Soft Border inner softness
2 Bound Soft Border boundary softness
To apply a beveled color edge
1
In the <Border Mode> group of the Border/Crop
menu, press [Beveled Color Edge].
2
In the <Color Adjust> group, select the edges for
adjustment among the [Top], [Left], [Right], and
[Bottom] edges. To select all the four edges, press
[All].
3
Set the color parameters.
97
Resizer