Sony MVS-6520 User Manual page 183

Replicating the wipe crop pattern
(Multiplication)
1
In the Wipe Crop menu (4116), press [Multi], turning
it on.
2
Set the following parameters.
No. Parameter Adjustment
1 H Multi Number of repetitions of pattern
horizontally
2 V Multi Number of repetitions of pattern
vertically
Replication layout
3 Invert Type
1 p. 105
a)
Modifying the wipe crop pattern edge
You can apply a border to the wipe crop pattern, or soften
the boundary.
1
In the <Edge> group of the Wipe Crop menu (4116),
select one of the following.
Border: Border
Soft: Soft edge
Soft Border: Soft border
2
Depending on the selection in step 1, adjust the
following parameters.
When Border is selected
No. Parameter Adjustment
1 Width Border width
When Soft is selected
No. Parameter Adjustment
1 Soft Edge softness
When Soft Border is selected
No. Parameter Adjustment
1 Width Border width
2 Inner Soft Border inner softness
3 Outer Soft Border outer softness
Selecting the signal or color to be inserted
in the wipe crop border
When you are applying a border or soft border to the wipe
crop, you can select the signal or color to be inserted in the
border.
1
In the <Border Fill> group of the Wipe Crop menu
(4116), select one of the following.
Flat Color: Single color
Mix Color: A mix color signal combining color 1 and
Ext Video: An external video signal input to the Ext
2
If [Flat Color] is selected in step 1, adjust the
following parameters.
No.
1
a)
2
3
Color Mix Settings
Notes
The color mix function is not supported by the MKS-6570
or MVE-8000A.
Creating a color combination pattern
To select the pattern
1
Open the DME >Edge >Color Mix menu (4117).
2
Press [Mix Pattern Select].
The Mix Pattern Select menu (4117.1) appears.
3
From the displayed patterns (wipe patterns 1 to 24),
press any pattern to select it.
In this state, you can adjust the pattern size and border
softness (see the next item).
To set the pattern size and position
1
In the Color Mix menu (4117), press [Position/Size].
2
Set the following parameters.
No.
1
2
3
4
5
color 2.
1 "Color Mix Settings" (p.
For details,
IN connector
Parameter Adjustment
Luminance Luminance
Saturation Saturation
Hue Hue
Parameter Adjustment
H Horizontal position
V Vertical position
Size Pattern size
Soft Pattern softness
Pattern Pattern number
Applying Special Effects (Edge Effects)
183).
183