Sony MVS-6520 User Manual page 185

When Key is selected using the MVE-8000A/9000
No. Parameter Adjustment
1 H Horizontal defocusing of key
signal
2 V Vertical defocusing of key signal
3 All Horizontal and vertical
defocusing of key signal
5
To cancel black level leaking that can occur at the edge
of the screen when the Defocus effect is enabled, press
[Clean Defocus], turning it on.
To mask the Defocus effect with a selected
pattern
Press [Mask] to display the Mask menu (4127)
(1 p. 189), and set the pattern type and modifiers.
Blur Settings
Applying the Blur effect
1
Open the DME >Video Modify >Defocus/Blur menu
(4121).
2
Press [Blur], turning it on.
Notes
On the MKS-6570 and MVE-8000A, the Glow and
Blur effects cannot be enabled at the same time. The
effect that was turned on most recently is enabled.
3
When using the MVE-8000A/9000, in the <Blur
Mode> group, select the signal to which you want
apply the Blur effect.
Video/Key: Video signal and key signal
Video: Video signal only
Key: Key signal only
4
Set the parameters (see step 4 in
Defocus effect" (1 p.
184)).
To mask the Blur effect with a selected pattern
Press [Mask] to display the Mask menu (4127)
(1 p. 189), and set the pattern type and modifiers.
Multi Move Settings
Applying the Multi Move effect
1
Open the DME >Video Modify >Multi Move menu
(4122).
2
3
Sepia Settings
Applying the Sepia effect
1
2
3
4
To mask the Sepia effect with a selected pattern
Press [Mask] to display the Mask menu (4127)
"Applying the
(1 p.
Mono Settings
Applying the Mono effect
1
2
Press [Multi Move], turning it on.
Set the following parameters.
No. Parameter Adjustment
1 Center X X-value of shrinking center point
2 Center Y Y-value of shrinking center point
3 Size Shrinking ratio
4 Aspect Aspect ratio of shrunken images
Open the DME >Video Modify >Color Modify menu
(4123).
Press [Sepia], turning it on.
Set the following parameters.
No. Parameter Adjustment
1 Mix Y Y signal mix amount
2 Mix C Chroma signal mix amount
3 Mix All Y signal and chroma signal mix
amount
To set the color of the sepia image, press [Sepia
Color], turning it on, and adjust the following
parameters.
No. Parameter Adjustment
1 Luminance Luminance
2 Saturation Saturation
3 Hue Hue
189), and set the pattern type and modifiers.
Open the DME >Video Modify >Color Modify menu
(4123).
Press [Mono], turning it on.
Applying Special Effects (Overall Signal Effects)
185