Care Of The Control Panel - Sony MVS-6520 User Manual

Maintenance
Exchanging Button Labels
A button top puller is supplied with the control panel.
After changing a pattern assigned to a numeric button, you
can use the following procedure to exchange the button
label.
1
Write the new pattern on one of the supplied exchange
labels.
2
Grip the holes on the button sides with the supplied
button top puller and remove the button.
3
Grip the slots on the sides of the white button cap with
the button top puller, so that the cap flexes slightly, and
remove the cap.
4
Remove the old label and insert the new label.
5
Replace the button cap.
6
Replace the button in its original location.
2

Care of the Control Panel

Clean the control panel unit, switches, and fader lever, by
gently wiping with a soft dry cloth.
In the event of excessive grime, moisten the cloth with a
little cold or lukewarm water, and wipe gently.
Notes
Wring out all surplus water from the cloth before use, to
prevent any surplus water from penetrating the panel.
Moisture inside the panel can cause it to fail.
Never use organic solvents, cleaners, or other chemicals.
Do not wipe with excessive force, as this may scratch the
panel.
3
445
Maintenance