Sony MVS-6520 User Manual page 148

Target bank Target keyer
M/E-1 Keys 1 to 4
PGM/PST Downstream
keys 1 to 4
Notes
If a DME is being used on the source keyer for a copy or
either keyer for a swap, then if for example there are
insufficient DME channels, or the limit on using DME
channels within an M/E bank is exceeded, it may not be
possible to select the DME.
Wipe copy and wipe swap
You can copy and swap the wipe settings among the banks
as follows.
Target bank Target data
M/E-1 Wipe settings.
PGM/PST However, it is not possible to carry out
copy or swap involving independent key
transition wipe settings.
Wipe copy and wipe swap in the
independent key transition control block
You can copy and swap the wipe settings among the
following keyers.
Target bank Target keyer
M/E-1 Keys 1 to 4
PGM/PST Downstream
keys 1 to 4
DME wipe copy and DME wipe swap
You can copy and swap the DME wipe settings among the
banks as follows.
Target bank Target data
DME wipe settings.
M/E-1
However, it is not possible to carry out
PGM/PST
copy or swap involving independent key
transition DME wipe settings.
DME wipe copy and DME wipe swap in the
independent key transition control block
You can copy and swap the DME wipe settings among the
following keyers.
148
Copy and Swap
Target data
Key settings excluding
the following data
items:
• Setup data
• Key snapshots
• Key memory
Matte data copy and swap
You can copy or swap the matte data among the following
color generators.
a) Only among keyers that support resizer and key edge.
Color data copy and swap
You can copy or swap the color data among the following
color generators.
Target data
Wipe settings in the
independent key
transition control
block.
a) Only among keyers that support resizer and key edge.
b) DME ch1 and ch2 are enabled when using the MKS-6570 only. DME ch5
c) Not possible for DME ch2 in an HD system.
d) Not displayed for DME ch5 to ch8.
Target bank Target keyer
M/E-1 Keys 1 to 4
(MVS-6520/
6530/3000A)
Keys 1, 2 (MVS- block.
3000)
PGM/PST Downstream
keys 1 to 4
(MVS-6520/
6530/3000A)
Downstream
keys 1, 2 (MVS-
3000)
Target bank Target keyer and data
M/E-1 Keys 1 to 4 and
PGM/PST downstream
keys 1 to 4
in each bank
Matte data for wipe border edge
• Matte data for color background 1
Color
• Matte data for color background 2
background
Target bank Target keyer and data
M/E-1 Keys 1 to 4 and
PGM/PST downstream
keys 1 to 4
in each block
Colors 1 and 2 for wipe border
Color data for preset color mix
• Colors 1 and 2 for color background 1
Color
• Colors 1 and 2 for color background 2
background
• Background
DME ch1, ch2,
b)
ch5 to ch8 • Border
• Sepia
• Light
• Shade c)
• Drop shadow
• Trail
to ch8 are enabled when using the MVE-8000A/9000 only.
Target data
DME wipe settings in
the independent key
transition control
• Matte data for key fill
• Matte data for key
a)
edge fill
• Colors 1 and 2 for
key fill
• Colors 1 and 2 for
a)
key edge fill
• "Zabton" color data a)
d)