Sony MVS-6520 User Manual page 298

For details about menus that can be recorded,
1 "Menu macro events" (p.
When auto insert mode is on, carrying out a menu
operation automatically saves the event in a menu
macro.
When auto insert mode is off, proceed to step 5.
5
When auto insert mode is off, press [Insert Before] or
[Insert After] to save the event.
6
Repeat steps 4 and 5 to register the required events in
the menu macro.
7
Set the event execution interval.
No. Parameter
5 Interval Time
(Sec)
The settings are applied to each menu macro register.
8
Press [Store].
9
Enter the menu macro register number as required, and
press [Enter].
The menu macro is saved with the specified number.
The menu returns to the state in step 1.
To set a pause duration
During menu macro editing, use the following procedure.
1
Enter the pause duration.
No. Parameter
4 Pause Time
(Sec)
2
Press [Pause Set].
When auto insert mode is on, this sets the pause
duration, and inserts the pause event.
When auto insert mode is off, use the same operations
"Creating a new menu macro"
as in step 5 of
(1 p. 297) to save the event.
Editing a menu macro
1
In the Macro >Menu Macro Register >Recall & Run
menu (5431), select the target register in the menu
macro register list
2
Press [Menu Macro Edit].
The Menu Macro Edit menu (7144.2) appears.
The menu macro register is recalled, and the system is
now in menu macro editing mode.
298
Menu Macros
296).
Adjustment
Event interval (seconds)
Adjustment
Pause duration (seconds)
(1 p. 296)
.
3
Select an event.
4
If required, turn [Auto Insert] on or off.
5
Carry out the editing operations.
When auto insert mode is on: Carrying out a menu
operation automatically inserts after the selected
event.
When auto insert mode is off: Perform one of the
following.
• To overwrite the selected event, carry out the new
menu operation, then press the [Modify] button.
• To insert an event before the selected event, carry
out the new menu operation, then press [Insert
Before].
• To insert an event after the selected event, carry out
the new menu operation, then press [Insert After].
To delete the selected event
Press [Delete].
To delete all events, select [All Event Select] and press
[Delete].
6
Set the event execution interval using the same
"Creating a new menu macro"
operation as step 7 of
(1 p. 297).
7
Save the register using the same operation as steps 8
"Creating a new menu macro" (1 p.
and 9 of
To exit the Menu Macro Edit menu without saving
the results of editing
Press [Exit].
To scroll the event display using the menu macro
listing
Select the event to display, and then use the [H Scroll]
parameter to scroll the characters in the "Data" field.
About the menu macro editing mode
display
If you switch to another menu while in menu macro editing
mode, the display is as shown below.
297).