Sony MVS-6520 User Manual page 190

Image 3: State with [Effect Gp1] and [Effect Gp2] set to On
The border or
beveled edge
effect is also
masked.
Freeze Settings
Freezes the input video. The following types are available:
Hard Freeze: Freezes the input video at an arbitrary
timing.
Time Strobe: Freezes the input video at specified intervals
for a specified length.
Film: Slows the apparent frame rate, for an effect like film.
You can specify the ratio of advancement.
For [Hard Freeze] and [Time Strobe], you can select the
first field or the frame as the freeze timing.
Notes
When the 720P signal format is used, the Film mode
cannot be selected.
Applying the Hard Freeze effect
1
Open the DME >Freeze >Freeze menu (4131).
2
In the <Freeze Timing> group, select the signal freeze
timing.
Frame: Freeze one frame of signal.
Field1: Freeze the first field of signal.
3
In the <Freeze> group, press [Hard Freeze], turning it
on.
Applying the Time Strobe effect
1
In the <Freeze Timing> group of the DME >Freeze
>Freeze menu (4131), select the signal freeze timing.
Frame: Freeze one frame of signal.
Field1: Freeze the first field of signal.
Notes
The freeze timing setting is not required when the
following signal formats are being used.
720P/50, 720P/59.94, 1080PsF/23.976, 1080PsF/24
2
In the <Freeze> group, press [Time Strobe], turning it
on.
190
Applying Special Effects (Nonlinear Effect Settings)
3
Set the following parameters.
No. Parameter Adjustment
1 Duration Freeze interval
2 Live Ratio of live video inserted
between freeze images
Applying the Film effect
Notes
When 720P signal format is used, the Film mode cannot be
selected.
1
In the <Freeze> group of the DME >Freeze >Freeze
menu (4131), press [Film], turning it on.
2
Adjust the following parameter.
No. Parameter Adjustment
1 Film Ratio of frame advance
Applying Special Effects
(Nonlinear Effect
Settings)
You can add a variety of effects, including effects that
change the shape of the image as a whole.
1
Open the DME >Non Linear/Corner Pin >Non Linear
menu (4141).
2
Display the menu for the effect that you want to apply
by pressing its button.
3
Make the settings for the selected effect.
Notes
• It is not possible to apply two or more nonlinear
effects at the same time. Turning any nonlinear
effect on automatically turns all other nonlinear
effects off.
• The Flex Shadow function
enabled if any of the nonlinear effects is enabled.
• When the signal format is 1080i, 1080PsF, or 720P,
nonlinear effects cannot be used on MKS-6570
channel 2.
(1 p. 178) cannot be