Bottom Panel - Sony MVS-6520 User Manual

Rear panel
a UTIL (utility) connector (RJ-45 compliant)
Intended for future expansion.
b MVS (multi format video switcher) connector (RJ-
45 compliant)
Connect to the MVS-6520/6530/3000A/3000 multi format
switcher processor. Connect to an Ethernet switch
connecting a DCU, MVE-8000A/9000 multi format DME
processor, and other devices.
c DEVICE 1 to 4 connectors (USB 2.0 compliant,
USB Type-A)
Connect to an ICP-6511 menu panel or a USB device.
ICP-6511 Menu Panel

Bottom panel

a DC IN connector
Connect to the 12V DC connector of the supplied AC
adaptor.
b DVI-D connector
Connect to the DVI-D output of the ICP-series control
panel.
d DVI-D connector
c DEVICE 1 to 4 connectors
b MVS connector
a UTIL connector
d DVI-D connector
Connect to an ICP-6511 menu panel or external monitor.
e U (signal ground) terminal
Connect to the system ground.
1)
f - AC IN (AC power input) A and B connectors
if
(3-pin)
Connect to 100 V to 240 V AC power supply with the
optional AC power cords.
The unit is equipped with two power supplies. When A or
B power supply is connected, unit operation can proceed.
1)
1) For information about devices that can be connected, contact your Sony
representative.
c DEVICE connector
b DVI-D connector
a DC IN connector
c DEVICE connector (USB 2.0, USB Type-B)
Connect to the DEVICE 1 connector of the ICP-series
control panel.
f -AC IN A and B connectors
e U terminal
ICP-6520 diagram shown.
Power Supply and Connectors
1)
57