Adjusting The Brightness - Sony MVS-6520 User Manual

Setting the Macro Execution Mode
1
Open the Engineering Setup >Panel >Operation
>Macro menu (7326.6).
2
In the <Macro Execution Mode> group, select the
macro execution mode.
Normal: Normal execution mode
Step: Step execution mode
3
When making a macro attachment setting, select
whether or not to enable cross-point button operations
in the <Attachment Setting Mode> group.
With Btn Function: Enables cross-point button
operations.
W/o Btn Function: Disables cross-point button
operations.
4
Using the <Macro 2nd Recall Mode> group, set the
action to occur during macro execution or when a
macro is stopped, if the cross-point button with the
macro attachment set is pressed again.
Continue: Resumes execution of a macro that has
been stopped (executing macros continue
execution).
Cancel: Terminates execution of a stopped or
executing macro.
5
Using the <Macro Recall Override> group buttons, set
the action to occur during macro execution or when a
macro is stopped, if another macro is recalled.
Disable: Ignores macro recalls.
Enable: Executes other macros.
To have a cross-point button with a macro
attachment set lit continuously
Press [Attchd Btn Indication], turning it on.
When the [MCRO ATTCH ENBL] button in the cross-
point control block is on, the cross-point button with a
macro attachment is constantly lit green.
Screen Saver and Other
Settings
Using the Menu Panel Screen Saver
1
In the Engineering Setup >Panel > Maintenance menu
(7327), press [Screen Saver], turning it on.
2
Adjust the following parameter.
No. Parameter Adjustment
1 Sleep Time Time until screen saver starts
operation
Using Panel Sleep Mode
The brightness of all indicators on the control panel, with
the exception of the menu screen, can be dimmed.
1
In the Engineering Setup >Panel >Maintenance menu
(7327), press [Panel Sleep Mode], turning it on.
2
Set the following parameter.
No. Parameter Adjustment
1 Sleep Time Time of inactivity until panel
sleep mode starts.

Adjusting the Brightness

You can adjust the brightness of the following hardware
parts.
LCD Btn Brightness: Adjusts the brightness of the LCD
buttons in the transition control block (ICP-6520/6530
only) and the Flexi Pad.
Display Brightness: Adjust the brightness of the organic
EL panel for the source name displays, etc.
Switch Brightness: Adjusts the brightness of the panel
switches.
The following describes the LCD brightness, as an
example. Use a similar process for the other adjustments.
1
In the Engineering Setup >Panel >Maintenance menu
(7327), press [LCD Btn Brightness].
2
Adjust the following parameter.
No. Parameter Adjustment
1 Brightness LCD button brightness
Setting the Touch Operation Beep
Sound
In the Engineering Setup >Panel >Maintenance menu
(7327), press [Touch Beep].
Each time you press this button, it toggles the beep setting
on and off.
Screen Saver and Other Settings
343