Sony MVS-6520 User Manual page 33

Name Description
MCRO ATTCH ENBL Enables the macro attachments
(macro attachment set for the buttons in the M/E
enable) (PGM/PST) bank. In the Setup
menu, you can also set the
buttons to light whenever they are
enabled.
KEY Pressing and holding this button
and then pressing a 2nd row
button selects the key signal.
1ST ROW DSPLY Displays the name of the bus and
(first row display)
function currently assigned to the
1st row in the source name
display.
2ND ROW DSPLY Displays the source name for the
(second row display) bus currently selected in the 1st
row in the source name display. If
the [UTIL/SBOX] button is
selected in the 1st row, the
function name is displayed.
SHIFT Performs one of the following
functions, according to the setting
made in the Setup menu.
• Source name display shift
button
Displays the name of the signal
in shift mode in the source
name display.
• Bus shift button
Functions as the shift button for
all busses in the M/E (PGM/
PST) bank.
c Source name displays
These show the names of the signals (sources) or registers
which can be selected on the cross-point buttons, in four-
character mode or auto mode.
While the [SHIFT] button assigned to the 1st row or the
[SHIFT] button assigned to the cross-point button row is
enabled, the source name of the signal assigned to the
cross-point button in shift mode appears.
You can set the source name display mode in the Setup
menu.
The following displays may also appear, depending on the
status of the [1ST ROW DSPLY], [2ND ROW DSPLY],
and [KEY] buttons.
Button name Display
1ST ROW 2ND ROW
DSPLY DSPLY
Off Off A/B bus signal names
On Off Bus names or function names
Off On Key/AUX bus signal names
function names
a) Key signal names are displayed when the [KEY] button is pressed, and
video signal names are displayed when the [KEY] button is not pressed.
a)
or
Names and Functions of Parts of the Control Panel
33