Renaming Files - Sony MVS-6520 User Manual

Renaming Files

1
Open the Frame Memory >File >Rename menu
(2546).
In the status area, regardless of whether pair mode is
on or off, all of the saved files appear as thumbnails.
2
Select the file to be renamed.
3
If necessary, check the contents of the frame memory
clip in the thumbnail display.
No. Parameter
3 Viewer
4
Press [Rename].
5
Enter the new file name and press [Enter].
Notes
The following names cannot be used:
CON, PRN, AUX, CLOCK$, NUL
COM0, COM1, COM2, COM3, COM4, COM5,
COM6, COM7, COM8, COM9
LPT0, LPT1, LPT2, LPT3, LPT4, LPT5, LPT6, LPT7,
LPT8, LPT9
Using an External HDD
You can connect an HDD to the USB port of the switcher
processor, to carry out the following operations.
Format: Format the HDD.
Backup: Batch save files from frame memory to the HDD.
Restore: Restore frame memory from files saved on the
HDD.
Since image data saved in memory is lost when the system
power is turned OFF, using an external HDD allows
required data to be preserved.
Notes
• Only one HDD can be connected to a single switcher
processor.
• While the HDD is being accessed, frame memory
operations are not possible. This applies to all operations
for frame memory, including frame memory recall by a
snapshot operation.
• During frame memory clip playback
pair assigned to either of the target FM selection buttons,
frame memory operations may not be performed
142
Using an External HDD
Adjustment
For a movie, the current frame
position. For a still image, no
effect.
(1 p. 136) of the
properly.
Carry out frame memory operations after stopping clip
playback.
For details about HDDs that can be connected, contact
your Sony service or sales representative.
HDD Formatting
When you connect an HDD for the first time, it is
necessary to format the HDD. This partitions the HDD,
creating 15 logical areas (FMHDD1 to FMHDD15).
1
Open the Frame Memory >External Device >Ext
HDD Format menu (2561).
To get the HDD information
Press [Refresh Status].
The capacity of the connected HDD is displayed in the
"Device" field.
2
Press [Format].
Notes
Carrying out formatting erases any existing data on the
HDD.
3
Check the message, then press [Yes].
HDD formatting starts.
4
Check the message, then press [OK].
Saving Files
You can save all of the files from frame memory to the
external HDD.
Notes
When performing this operation for the first time, format
the HDD beforehand (1 p.
1
Open the Frame Memory >External Device >Ext
HDD Backup/Restore menu (2562).
For each partition, a list of the directory names and
number of files appears.
To get the HDD information
Press [Refresh Status].
The capacity and partition information of the
connected HDD is displayed.
2
Select a logical drive (FMHDD1 to FMHDD15).
142).