Data Saved By [Initial Status Define] - Sony MVS-6520 User Manual

Data Saved by [Initial Status Define]

Included in Panel
Menu No. Menu path
– –
3211 Misc >Enable >Port Enable
6351 Snapshot >Key Snapshot >Attribute
Included in Switcher (Same as data saved in Snapshots)
Menu No. Menu path
– –
3211 Misc >Enable >Port Enable
3213 Misc >Enable >Side Flags
Included in DME
Menu No. Menu path
4100 DME >Status
4111 DME >Edge >Border/Crop
4112 DME >Edge >Beveled Edge
4121 to
DME >Video Modify
4124
4131 DME >Freeze >Freeze
4141
DME >Non Linear/Corner Pin >Non
(4141.1 to
Linear
4141.28)
4151 DME >Light/Trail >Lighting
4152 DME >Light/Trail >Trail
4153 DME >Light/Trail >Motion Decay
4154 DME >Light/Trail >KF Strobe
4161 DME >Input/Output >Bkgd
4162 DME >Input/Output >Video/Key
4163 DME >Input/Output >Process
4164 DME >Input/Output >Graphic
Saved data
• Settings for the following cross-point control block buttons
- Delegation buttons assigned to the 1st row
- [1ST ROW DSPLY], [2ND ROW DSPLY], [SHIFT], [MCRO ATTCH
ENBL]
• Transition control block: [KF], [SHIFT], and independent key transition
[KEY1] to [KEY4] buttons
• Flexi Pad: Settings for the [WIPE], [DME WIPE], [SNAPSHOT], [EFF],
[SHOTBOX], [MCRO], [TRNS RATE], [KEY ADJ], [KEY SS] buttons
• Settings for "System Manager Enbl" assigned to user preference
button on the menu panel
[System Manager] settings
Settings of <Recall Mode> group
Saved data
• For each M/E, setting data relating to the following:
cross-points, transitions, Key1 to Key4 (including independent key
transition settings), wipes, DME wipes
• Color backgrounds 1/2
• Frame memory
• AUX bus (including CCR, AUX mix transition settings)
Setting data for <Switcher> group
All data relating to Side Flags menu
Saved data
Three-dimensional transformation data
All data relating to Border/Crop menu
All data relating to Beveled Edge menu
All data relating to Video Modify menu
All data relating to Freeze menu
All data relating to Non Linear menu
All data relating to Lighting menu
All data relating to Trail menu
All data relating to Motion Decay menu
All data relating to KF Strobe menu
All data relating to Bkgd menu
All data relating to Video/Key menu
All data relating to Process menu
All data relating to Graphic menu
Data Saved by [Setup Define] and [Initial Status Define]
433