Sony MVS-6520 User Manual page 90

Multi format switcher system with icp-series control panel
Hide thumbs Also See for MVS-6520:
Table of Contents

Advertisement

After selecting one of the patterns (patterns 1 to 24)
displayed in the Mix Pattern Select menu, you can
adjust the following parameters.
No.
Parameter
1
Size
2
Soft
4
Adjust color 1 and color 2.
To adjust colors 1 and 2, turn on [Color1] or [Color2]
respectively, then adjust the following parameters.
No.
Parameter
1
Luminance
2
Saturation
3
Hue
5
If required, set the pattern modifiers.
When turning [Position] on and setting the pattern
position
No.
Parameter
1
Position H
2
Position V
1 p.
a)
103.
When turning [Multi] on and replicating the
pattern
No.
Parameter
1
H Multi
2
V Multi
3
Invert Type
1 p.
a)
105.
When turning [Aspect] on and setting the aspect
ratio of the pattern
No.
Parameter
1
Aspect
1 p.
a)
105.
When turning [Angle] on in the <Rotation> group
and inclining the pattern
No.
Parameter
1
Angle
1 p.
a)
104.
90
Key Adjustments (Menus)
Adjustment
Pattern size
Edge softness of the pattern
Adjustment
Luminance
Saturation
Hue
Adjustment
a)
Horizontal position
a)
Vertical position
Adjustment
Number of repetitions of pattern
horizontally
Number of repetitions of pattern
vertically
a)
Replication layout
Adjustment
a)
Aspect ratio
Adjustment
a)
Rotation angle of pattern
When turning [Speed] on in the <Rotation> group
and rotating the pattern at a constant rate
No.
Parameter
Adjustment
1
Speed
Rotation speed of pattern
1 p. 104
a)
6
To interchange color 1 and color 2, press the [Color
Invert] button, turning it on.
Applying the zabton effect
Notes
The zabton function and [Fine Key]
turned on at the same time.
1
In the M/E-1 >Key1 >Edge menu (1112), press
[Zabton], turning it on.
2
Adjust the following parameters.
No.
Parameter
Adjustment
1
Size
Pattern size
2
Soft
Edge softness of the pattern
3
Density
Density
Notes
If [Mask Pattern] is selected in step 4 below and [Box]
is selected for the mask, the "Size" parameter cannot
be changed. Set "Size" in the Main Mask menu (1113).
3
To adjust the pattern and color, press [Zabton Adjust].
The Zabton Adjust menu (1112.3) appears.
4
In the <Zabton Pattern> group, select the pattern.
Key Wipe: Use a key wipe.
You can change this pattern by pressing [Pattern
Select] to open the menu for key wipe pattern
selection (Pattern Select menu), and make
adjustments by pressing [Pattern Adjust] to open
the menu for pattern adjustment (Wipe Adjust
menu).
Key Edge Pattern: Use a color mixing pattern for key
edge.
You can change this pattern by pressing [Pattern
Select] to open the menu for edge color mix
dedicated wipe pattern selection (Mix Ptn Select
menu), and make adjustments by pressing [Pattern
Adjust] to open the menu for pattern adjustment
(Matte Adjust menu).
Mask Pattern: Use the mask [Box] or [Pattern].
a)
(1 p. 89)
cannot be

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents