Sony MVS-6520 User Manual page 222

The selected channels are combined.
To cancel a combine
When for example [Ch6+Ch7] is on, pressing [Ch6+Ch7]
once more turns it off. Alternatively, pressing a different
combination button to select it cancels the combine
selection for the current combination.
Mixing the images of up to four
consecutive channels
1
In the Global Effect >Ch5-Ch8 >Combiner Priority
menu (4221), press [Mix], turning it on.
2
Adjust the following parameters.
For "Ch5+Ch6"
No. Parameter
1 Mix
1 p.
a) 220.
For "Ch5+Ch6+Ch7"
No. Parameter
1 Mix1
2 Mix2
1 p.
a) 220.
For "Ch5+Ch6+Ch7+Ch8"
The [Mix1] and [Mix2] parameters set the same
parameters as for "Ch5+Ch6+Ch7" respectively. The
[Mix3] parameter can also be set.
Mixing pairwise the images of channels 5
and 6, and channels 7 and 8
1
In the Global Effect >Ch5-Ch8 >Combiner Priority
menu (4221), press [Combiner1 Mix], turning it on.
2
Adjust the following parameter.
No. Parameter
1 Mix1
1 p.
a) 221.
3
Press [Combiner2 Mix], turning it on.
4
Adjust the following parameter.
222
Global Effect Operations
Adjustment
a)
Mix degree
Adjustment
Mix degree for mix of channel 5
a)
with result of Mix2
Mix degree for channels 6 and
a)
7
Adjustment
Mix degree for channels 5 and
a)
6
No. Parameter Adjustment
1 Mix2 Mix degree for channels 7 and
a)
8
1 p.
a) 221.
Automatically setting the priority of
overlapping images
To set the system so that the priority of overlapping images
is automatically determined by their position on the Z-axis,
in the Global Effect >Ch5-Ch8 >Combiner Priority menu
(4221), press [Auto], turning it on.
Notes
It is not possible to cross images. If an image is rotated, the
priority is determined by the position on the Z-axis of the
center of the image.
Crossing images
consecutive channels in three dimensions
Notes
Three-dimensional image crossing is not supported on the
MKS-6570 or MVE-8000A.
1
In the Global Effect >Ch5-Ch8 >Combiner Priority
menu (4221), press [Depth], turning it on.
2
Adjust the following parameters.
For "Ch5+Ch6"
No. Parameter Adjustment
1 Soft Softness of edges of crossed
section
For "Ch5+Ch6+Ch7"
No. Parameter Adjustment
1 Soft1 Softness of edges of channel 5
and channel 6 crossed section
2 Soft2 Softness of edges of channel 6
and channel 7 crossed section
For "Ch5+Ch6+Ch7+Ch8"
The [Soft1] and [Soft2] parameters set the same
parameters as for "Ch5+Ch6+Ch7" respectively. The
[Soft3] parameter can also be set.
from up to four