Original image (16:9)
For down-conversion, the image position setting in edge
crop mode is the same as for up-conversion.
The value is from –30 to +30 inclusive.
1 "Setting the image position in edge crop
For details,
up-conversion mode" (p.
350).
For down-conversion, the enhancer settings are the same
as for up-conversion.
1 "Making enhancer settings" (p.
For details,
Copying format converter input data
1
In the Engineering Setup >Switcher >Input >FC
Adjust menu (7332.2), press [Copy].
The Copy/Swap >Copy >Format Converter menu
(3121) appears.
2
Select [Input] in the <Data Select> group.
3
Select the data and press [Copy].
Down-converted image (4:3)
Edge Crop
Letter Box 13:9
Letter Box 14:9
Letter Box 16:9
Squeeze
350).
Signal Output Settings
Notes
• On the MVS-6520, MVS-3000A, and MVS-3000,
numbers 1 to 16 can be configured as output signals. If
numbers 17 to 32 are selected, the settings are disabled.
The configurable numbers vary depending on the signal
type, as given below.
Switcher
Output signal type
processor
Re-Entry
Source
MVS-6520/
1 to 16
3000A
MVS-6530
1 to 24
MVS-3000
1 to 12
• The Video Clip, V Blank, Through, Safe Title, and 4:3
Crop cannot be set for the following outputs.
- Output signals from connectors assigned to Out 1 to xx
(where "xx" is 16 (MVS-6520/3000A), 24 (MVS-
6530), or 12 (MVS-3000))
- Multi Viewer 1 and 2
- FC Output 1 and 2
- DME Monitor 1 and 2
Assigning Output Signals
1
Open the Engineering Setup >Switcher >Output
>Output Assign menu (7333.1).
2
In the <Output Assign> group, select one of the
following.
Re-Entry Source: It is possible to make duplicate
assignments.
M/E-1 Output 1 to 4
1)
P/P Output 1 to 4
DME Monitor Video
2)
DME Monitor Key
Undefined
Color Bkgd 2
Frame Memory 1 to 8
Aux Bus: It is not possible to make duplicate
assignments.
Preset
Edit Preview
AUX 1 to 24
Output/MV/FC/DME: It is possible to make
duplicate assignments.
Out 1 to xx (where "xx" is 16 (MVS-6520/
3000A), 24 (MVS-6530), or 12 (MVS-3000))
Multi Viewer 1 and 2
Aux Bus
Output/MV/FC/
DME
1 to 16
1 to 32
1 to 16
1)
2)
3)
Signal Output Settings
351