Sony MVS-6520 User Manual page 257

Transition First transition
start completion
point
Effect execution
Image created by interpolation
Background A
Background B
State before modification
"Frame in-out H" transition mode
This mode is specified when creating a transition effect in
the horizontal direction.
In this mode, when the first transition has completed, you
can move the image with the positioner in both horizontal
and vertical directions. The image at the transition start
point and end point also moves.
The description is of an example of creating an effect such
as the following.
Transition First transition
start completion
point
Effect execution
Image created by interpolation
Background A
Background B
At the first transition completion point, if you move the
image with the positioner, the transition appears as in the
following figure.
Transition end
"Frame in-out V" transition mode
This mode is specified when creating a transition effect in
In this mode, in the state at completion of the first
both horizontal and vertical directions. The image at the
transition start point and end point also moves.
The description is of an example of creating an effect such
as the following.
Transition
end
At the first transition completion point, if you move the
image with the positioner, the transition appears as in the
following figure.
Transition First transition
start completion
point
Effect execution
Image created by interpolation
Background A
Background B
State before modification
Transition
First transition
start
completion point
Effect execution
Image created by interpolation
Background A
Background B
Creating and Editing Keyframes
Transition end
Transition end
257