Rings Settings - Sony MVS-6520 User Manual

No. Parameter Adjustment
4 Offset A
Center of modulation range along
periphery
To reverse the ripple range
When modulation mode is Radial, Both, or Shape:
Press [Range Rev R], turning it on.
When modulation mode is Both or Angular: Press
[Range Rev A], turning it on.
Other settings
You can turn [Lock], [Form], [Random], and [Range
Envelope] on to do the following.
• Stop the waves
• Select the wave shape
• Randomize the waveform
• Smooth the range envelope when the wave range is
limited
For details about the Lock, Form, Random, and Range
1 "Wave Settings" (p.
Envelope functions,

Rings Settings

You can set the degree of transition, the degree of
randomness in the distance moved by each block, the
amount of movement, the width of the partitions, the
degree of randomness in partition width, the center point,
the starting angle, and other parameters.
Applying the Rings effect
1
Open the Non Linear >Rings menu (4141.7).
2
To make transition settings, press [Transition] and set
the following parameters.
No. Parameter Adjustment
1 Transition Degree of transition
2 Random
Degree of randomness in
distance moved by each block
3 Spiral Amount of movement toward
periphery accompanying
transition
3
To set the partition method, press [Partition] and set
the following parameters.
No. Parameter Adjustment
1 Width Width of partition
2 Random Degree of randomness in
partition width
3 Angle Starting angle of effect
4
To set the ring center position, press [Position] and set
the following parameters.
No.
1
2
5
To partition into pixels, press [Pixel], turning it on, and
set the following parameters.
No.
1
2
Broken Glass Settings
You can set the degree of transition, the degree of
191).
randomness in the distance moved by each block, the
amount of movement, the width of the partitions, the
degree of randomness in partition width, the center point,
the starting angle, and other parameters.
You can also fix the direction in which shards scatter.
Applying the Broken Glass effect
Display the Non Linear >Broken Glass menu (4141.8).
The items and parameters in the Broken Glass menu are
the same as those of the Rings menu
exception of [Direction].
To fix the direction in which shards scatter
Press [Direction], turning it on.
Flying Bars Settings
You can set the degree of transition, the degree of
randomness in the distance moved by each block, the
direction of movement, the width of the partitions, the
degree of randomness in partition width, the partition
angle, and other parameters.
Applying the Flying Bars effect
1
Open the Non Linear >Flying Bars menu (4141.9).
2
To make transition settings, press [Transition] and set
the following parameters.
No.
1
Parameter Adjustment
H Horizontal center position
V Vertical center position
Parameter Adjustment
Density Degree to which image
disappears around periphery
Random Degree of jaggies at block edges
(1 p.
Parameter Adjustment
Transition Degree of transition
Applying Special Effects (Nonlinear Effect Settings)
195), with the
195