Enabling Igmp Snooping - Huawei Quidway S2700 Series Configuration Manual

Quidway S2700 Series Ethernet Switches
Configuration Guide - Multicast
maintain the forwarding entries for the multicast packets. In this manner, the S2700 manages
and controls forwarding of multicast data packets to implement Layer 2 multicast.
Pre-configuration Tasks
Before configuring IGMP snooping in a VLAN, complete the following tasks:
l
l
l
Data Preparation
To configure IGMP snooping in a VLAN, you need the following data.
No.
1
2
3
4
5
6
7
8

1.3.2 Enabling IGMP Snooping

Context
By default, IGMP snooping is disabled on the S2700. You need to enable IGMP snooping on
the S2700 globally.
Procedure
Step 1 Run:
system-view
Issue 01 (2011-07-15)
Connecting interfaces and configuring the physical parameters of each interface to make
the physical layer in Up state
Creating a VLAN
Adding interfaces to the VLAN
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1 IGMP Snooping Configuration
Data
ID of the VLAN
(Optional) Version of IGMP messages
Types and numbers of interfaces
(Optional) Parameters of a querier: interval
for sending IGMP General Query messages,
robustness variable, maximum response time,
and interval for sending Last Member Query
messages
(Optional) ACL rules applied to a multicast
policy
(Optional) Suppression duration of IGMP
messages
(Optional) Aging time of the router interface
(Optional) Source IP address of IGMP Query
messages
4