Front And Rear Panels - Optical Systems Design OSD2184P Operator's Manual

1.5

FRONT AND REAR PANELS

The front panel consists of one fixed copper port for 10/100/1000Base-T, one SFP port and a 2-way
terminal block power connector while the rear panel has one fixed copper port for 10/100/1000Base-T,
a 3-way DIP switch and a USB port. The SFP device is sold separately giving the user choice to use
either one or two fiber communications with various optical power outputs depending on the distance
required. Each section will be described further throughout this manual.
Fixed RJ45 Copper Port 1
SFP Port 2
3-way DIP-Switch
PAGE 11
OPTICAL SYSTEMS DESIGN
Front Panel
Rear Panel
FIGURE 2: FRONT AND REAR PANELS
OSD2184P OPERATOR MANUAL
Power Input
Fixed RJ45 Copper Port 3
USB port
PoE Mode Push Button
Erase/Restore Push Button
DOC ID: 10119601