Features Of The Agilent 1260 Infinity Ii Quaternary Lc - Agilent Technologies 1260 Infinity II Quaternary System Manual

Table of Contents

Features of the Agilent 1260 Infinity II Quaternary LC

With an operating pressure of up to 600 bar the 1260 Infinity II Quaternary

Pump is compatible with HPLC and UHPLC, i.e. handling 2.1, 3, and 4.6 mm ID

columns over the flow rate range (up to 5 mL/min) and semi preparative

analysis due to flow up to 10 mL/min.

Ultralow carryover – The 1260 Infinity II Multisampler is designed for low

carryover, you can take clean to a whole new level with the multi-wash

capability, cleaning all relevant injection parts between runs. This

sophisticated, integrated feature flushes the injection needle outside with

three solvents, and uses seat back flush procedures to reduce carryover to less

than 9 ppm.

Dual-needle injection – By running samples alternately through one or the

other injection path, you can reduce cycle times to mere seconds, virtually

eliminating conventional wait times—whether for large volume loadings or

flushing procedures.

Higher sample capacity per benchspace – Using shallow well-plate drawers,

the 1260 Infinity II Multisampler takes a maximum load of 16 microtiter plates

and up to 6144 samples—the most of any single system.

Advanced column capacity for up to 4 columns in a single 1260 Infinity II

Multicolumn Thermostat delivering best flexibility for column switching.

Fast and easy connections with A-line Quick Connect fittings to save time and

trouble.

1260 Infinity II DAD HS Detector delivers lower detection limit and higher

data quality for more confidence.

Seamless integration in your chromatography data system: Agilent's

Instrument Control Framework (ICF) enables smooth control of Agilent LC

instrumentation through third-party chromatography data systems.

1260 Infinity II Quaternary System - Manual and Quick Guide

Introduction

Table of Contents

Table of Contents

Infinitylab lc series