Making External Route Selection Rules Defined In Rfc1583 Compatible; Logging Neighbor State Changes; Configuring Ospf Network Management - H3C S3610-28P Operation Manual

Operation Manual – IPv4 Routing
H3C S3610&S5510 Series Ethernet Switches
Specify the maximum
number of external LSAs
in the LSDB

3.7.12 Making External Route Selection Rules Defined in RFC1583 Compatible

The selection of an external route from multiple LSAs defined in RFC2328 is different
from the one defined in RFC1583.
Follow these steps to make them compatible:
Enter system view
Enter OSPF view
Make RFC1583
compatible

3.7.13 Logging Neighbor State Changes

Follow these steps to enable the logging of neighbor state changes:
To do...
Enter system view
Enter OSPF view
Enable the logging
of neighbor state
changes

3.7.14 Configuring OSPF Network Management

Follow these steps to configure OSPF network management:
To do... Use the command...
lsdb-overflow-limit
number
To do... Use the command...
system-view
ospf [ process-id |
router-id router-id |
vpn-instance
instance-name ] *
rfc1583 compatible
Use the command...
system-view
ospf [ process-id | router-id router-id
| vpn-instance instance-name ] *
log-peer-change
3-40
Chapter 3 OSPF Configuration
Remarks
Optional
No limitation by default
Remarks
—
Required
Optional
Compatible by default
Remarks
—
—
Optional
Enabled by default