Bfd-Gr - H3C S3610-28P Operation Manual

Operation Manual – IPv4 Routing
H3C S3610&S5510 Series Ethernet Switches
An NSSA external LSA originates from the ASBR in a NSSA and is flooded in the NSSA
area only. It has the same format as the AS external LSA.
Figure 3-20 NSSA external LSA format
3.1.6 Supported OSPF Features
I. Multi-process
With multi-process support, multiple OSPF processes can run on a router
simultaneously and independently. Routing information interactions between different
processes seem like interactions between different routing protocols. Multiple OSPF
processes can use the same RID.
An interface of a router can only belong to a single OSPF process.
II. Authentication
OSPF supports authentication on packets. Only packets that pass the authentication
are received. If hello packets cannot pass authentication, no neighbor relationship can
be established.
The authentication type for interfaces attached to a single area must be identical.
Authentication types include non-authentication, plaintext authentication and MD5
ciphertext authentication. The authentication password for interfaces attached to a
network segment must be identical.
III. OSPF Graceful Restart
Note:
For GR information, refer to BFD-GR.
3-20
Chapter 3 OSPF Configuration