Sony MVS-8000X User Manual page 133

To set parameters
To adjust the value of a knob setting
parameter button with the mouse, you can
use either of the following three methods.
• Position the cursor over the knob setting
parameter button for which you want to
adjust the value, and turn the mouse
wheel.
• Position the cursor over the knob setting
parameter button for which you want to
adjust the value, then hold down the right
mouse button, and drag the bar showing
the setting to the desired value.
• Position the cursor over the knob setting
parameter button for which you want to
adjust the value, then click the left mouse
button to open the numeric keypad
window by which you can input the
desired value.
To scroll a list
Position the cursor over the list you want to
scroll, and turn the mouse wheel.
In the setup menus you can select the
direction of mouse wheel rotation that
increases the setting value. And you can
also switch the functions of the right and
left mouse buttons.
For details, see Chapter 19 "Control Panel
Setup (Panel)" (Volume 3).
Numeric keypad window
1 Item display
2 Max./min. value indication
a Item display
This is the name of the parameter being set
in the numeric keypad window.
b Max./min. (maximum/minimum)
value indication
This shows the maximum and minimum
settings of the parameter.
c Input value
This is the value being input into the
numeric keypad window.
d Close button
This closes the numeric keypad window.
e TC (timecode) button
When the numeric keypad window is
opened for a setting requiring a timecode
value to be entered, this button appears in a
depressed state.
You can enter a timecode value in the range
that depends on the signal format (see
Basic Menu Operations
3 Input value
4 Close button
5 TC (timecode)
button
6 – (minus)
button
7 Clear button
8 Trim button
9 Enter button
133