Attaching The Input Adaptor; Selecting The Default Settings - Sony MEU-WX1 Operating Instructions Manual

Attaching the Input
Adaptor
Before attaching the input adaptor, disconnect the power
cord.
Attach the input adaptor to the optional input slot after
removing the panel of the slot.
1
Remove the panel of the optional input slot.
2
Insert the input adaptor into the slot.
3
Tighten the screws.
Selecting the Default
Settings
When you turn on the unit for the first time after
purchasing it, select the area where you intend to use this
unit from among the options.
The default setting values for each area
5
4
3
3
1 NORTH AMERICA
ARGENTINA
2 LATIN AMERICA
PARAGUAY
PAL&PAL-N AREA
URUGUAY
NTSC&PAL-M AREA OTHER AREA
3 AFRICA AUSTRALASIA
EUROPE MIDDLE-EAST
NTSC AREA
4 ASIA EXCEPT JAPAN
PAL AREA
5 JAPAN
Attaching the Input Adaptor / Selecting the Default Settings
3
1
2
COLOR COMP NTSC
TEMP LEVEL SETUP
Low BETA7.5 7.5
Low SMPTE 0
Low SMPTE 0
Low SMPTE 0
Low BETA7.5 7.5
Low SMPTE 0
Low BETA7.5 7.5
Low SMPTE 0
High SMPTE 0
17