Sony MVS-8000X User Manual page 58

g M/E bank display
This indicates the notional mix/effect bank
name to which the particular M/E bank is
assigned, as a four-character identifier.
h Macro buttons
PRE MCRO (pre macro) button: Use this
button to set a macro attachment in pre
macro mode. For setting in macro only
mode, use this in combination with a
macro only set button assigned to the
utility/shotbox control block or a user
preference button. Alternatively,
without using the button, you can make
the selection simply, by pressing
simultaneously with the [PRE MCRO]
button.
Function of this button varies as
follows depending on the operation
mode selected in the Setup menu.
• Switching dual background bus
mode
• Switching utility/shotbox mode
• Disabling cross-point button
operations
For details, see "Setting the
Assignment of Macro Operation
Buttons" in Chapter 19 (Volume 3).
Notes
For the CCP-6224/6324, [AUX CTRL]
is assigned to this button.
For details, see "Cross-Point Control
Block (CCP-6224/6324) in the AUX
Operating Mode" (page 108).
POST MCRO (post macro) button: Use
this button to set a macro attachment in
post macro mode. For setting in macro
only mode, use this in combination
with a macro only set button assigned
to the utility/shotbox control block or a
user preference button. Alternatively,
without using the button, you can make
58
Names and Functions of Parts of the Control Panel
the selection simply, by pressing
simultaneously with the [PRE MCRO]
button.
This button is disabled when some
operation modes are selected in the
Setup menu.
For details, see "Setting the
Assignment of Macro Operation
Buttons" in Chapter 19 (Volume 3).
Notes
For the CCP-6224/6324, [AUX
DSPLY] is assigned to this button.
For details, see "Cross-Point Control
Block (CCP-6224/6324) in the AUX
Operating Mode" (page 108).
MCRO ATTCH ENBL (macro
attachment enable) button: When
this button is on, the macro attachments
set for the buttons of the M/E bank are
enabled.
You can make a setup setting such that
enabled buttons light.