Sony MVS-8000X User Manual page 112

c Region selection buttons
These select the function block to which
operations apply.
When the mode selection button selection is
EFF/SNAPSHOT/SHOT BOX/MCRO,
you can select multiple region selection
buttons simultaneously. In this case, the
first button pressed lights green as the
reference region, and the other buttons
pressed light amber (the buttons for the
regions shown in the memory recall section
are yellow).
ALL/KEY SHIFT: Selects all regions.
When any region is selected, press this
button to unset the selection of all
regions.
When KEY ADJ (key adjust) or KEY
SS (key snapshot) is selected as the
function mode, these buttons are for
KEY5 to KEY8 selection.
DME1 to DME2: Select DME channels.
M/E1, M/E2, P/P: Select the M/E-1, M/E-
2, and PGM/PST regions respectively.
USER4: Selects the USER4 region.
DEV1: Selects the device 1 region.
MORE: Displays buttons in the memory
recall section for regions not assigned
to a region selection button, so that they
can be selected. By default the
following regions are shown on the
memory recall section buttons.
MSTR (master snapshot, master
timeline registers), USER1 to 3,
USER5 to 8, MCRO (macro),
DEV2 (device 2), PBUS, GPI,
RTR(router)
If there is a region selected in the
memory recall section, this is indicated
by the MORE button lighting green.
To revert the button displays in the
memory recall section, press the
[MORE] button once more, or press the
[EXIT] button that appears in the
memory recall section.
Note that except for the [ALL],
112
Names and Functions of Parts of the Control Panel
[EXIT], and [MORE] buttons, you can
freely change the assignment to regions
in the Setup menu.
d Alphanumeric display
This shows the selected region name or
register number, and entered numeric
values.
e Memory recall section
This comprises 16 LCD buttons, each with
a display that changes according to the
operating mode.
f Adjustment knob displays
Each of these shows the initial letter of the
parameter that can be adjusted with the
knob to the right, and the setting value
(three digit places, including the minus
sign).
g Adjustment knobs
Use these to adjust the parameters selected
with the memory recall section buttons.