Transition Control Block (Compact Type)
The compact version of the transition
control block shown in the following figure
has fewer buttons than the standard type.
7 PRIOR SET button
4 Wipe direction selection buttons
a Next transition selection buttons
Press these buttons, turning them on, to
determine what the next transition will
apply to.
BKGD: Next transition changes the
background.
KEY1 to KEY8 (DSK1 to DSK8 in the
PGM/PST bank): Press this button,
turning it on, to make the next
transition insert or remove the
104
Names and Functions of Parts of the Control Panel
1 Next transition selection buttons
6 Key status display
2 Transition type selection buttons
5 TRANS PVW button
3 Transition execution section
Independent key transition operations can
also be controlled with the compact
transition control block.
8 Independent key transition
execution section
corresponding key (keys 1 to 8). If a
key is currently inserted it will be
removed, and if it is not currently
inserted, it will be inserted.
In the PGM/PST bank, this inserts or
removes downstream keys 1 to 8.
For details of assignment and selection
of keys 5 to 8, see the following sections
in Appendix (Volume 1): "Assigning
Buttons for Selection of Keys 5 to 8 in