Sony MVS-8000X User Manual page 128

Returning to default state in function
groupings
1
Press the [Default Recall] button,
turning it on.
This enters the menu default recall
mode.
2
Press the VF button you want to return
to the default state.
This returns the settings within the
function grouping to the default state,
and the [Default Recall] button goes
off.
Notes
The default state of the settings depends on
the setting of the initial status mode, set in
the Setup menu of system setup, as follows.
User: The state when [Initial Status Define]
is executed.
Factory: Factory default settings
Returning knob parameters to
default state
1
Press the [Default Recall] button,
turning it on.
Menus allowing a return to default settings
Top menu selection
button name
M/E1
128
Basic Menu Operations
VF number Menu number
(HF number)
a)
VF1 1110-series/1510-series
a)
VF2 1120-series/1520-series
a)
VF3 1130-series/1530-series
a)
VF4 1140-series/1540-series
VF5 1150-series
VF6 1160-series
VF7 1170-series
This enters the menu default recall
mode.
2
Press the knob parameter button you
want to return to the default state.
This returns the knob parameter value
to the default state, and the [Default
Recall] button goes off.
Notes
• In the following table, "Menus allowing a
return to default settings," the default
recall function does not apply to some
knob parameters.
For details, see the table, "Knob
parameters to which default recall does
not apply" on page 130.
• The default recall function does not
return the horizontal (H) and vertical (V)
position settings to their default state
individually. Returning the horizontal
(H) position to its default state also
returns the vertical (V) position to its
default state automatically, and vice
versa.
For details, see the table, "Knob
parameters subject to restriction on
default recall" on page 132.
Menu name
Key1/Key5
Key2/Key6
Key3/Key7
Key4/Key8
Wipe
DME Wipe
Misc
b)
b)
b)
b)
b)
b)
b)