Sony MVS-8000X User Manual page 127

Multi-format production switcher processor with ccp-8000 series center control panel volume 1
Hide thumbs Also See for MVS-8000X:
Table of Contents

Advertisement

Selecting a function
Press the appropriate function button within
the function button area.
Shape and color of the button
Pressing the button turns it on, and it lights,
showing the state.
Lit pale blue: The function is enabled, and
the parameters can currently be
adjusted with the knobs.
Lit orange: The function is enabled.
Lit purple: Execution button. Pressing the
button immediately executes the
function. (Example: [Auto Start]
button in the Chroma Adjust menu)
Pressing a button of this type displays a
further menu, allowing more detailed
Example: When wipe pattern key is selected
Knob
Parameter
1
Size
2
Soft
3
Density
When the [MENU] button in the device
control block is lit, you can use the trackball
and Z-ring to control the parameters.
• Move the trackball on the x-axis to
control the parameter for knob 1 or on the
y-axis to control the parameter for knob
2. Moving up or to the right increases the
parameter value, and moving down or to
the left decreases the parameter value.
settings. (Example: [Chroma Adjust]
button in the Type menu)
Setting parameters
This marking on a function button indicates
that there are parameters which can be
adjusted with the knobs.
Pressing this function button assigns
parameters to the knobs.
You can set the parameter values by either
of the following methods.
• Turn the knob (1 to 5) corresponding to
the parameter, to adjust the value.
• Press the knob parameter buttons (1 to 5)
corresponding to the parameter. This
displays the numeric keypad window
allowing you to enter the desired value.
In the description of specific setting
procedures, the knob adjustment is
described, as follows.
Adjustment
Pattern size
Edge softness
Key density
• Use the Z-ring to adjust the parameter for
knob 3. Turning clockwise increases the
parameter value, and turning
counterclockwise decreases the
parameter value.
Going back to the previous menu
To return to the last displayed menu, press
the previous page button.
mark
Setting values
0.00 to 100.00
0.00 to 100.00
0.00 to 100.00
Basic Menu Operations
127

Advertisement

Table of Contents
loading

Table of Contents