Setting Up A Proxy Server Manually; Operation - Sony GIGAJUKE NAS-C5E Operating Instructions Manual

 Network name (SSID): Enter the network name (SSID).
 Security setting: Select [WEP64/128bit], [WPA/WPA2], or [None].
 Network key: Enter the network key (security key). Hexadecimal number, ASCII code can be
used.
 Address setting: Select [Full automatic] or [Custom].
When you select [Full automatic]:
The unit automatically sets the IP address and the DNS server, and then moves to the display for
step 6.
When you select [Custom]:
The display switches to the IP address setting display.
 IP address setting: Select [Auto (DHCP)] or [Manual].
When you select [Auto (DHCP)]:
The unit automatically sets the IP address, subnet mask, and default gateway.
When you select [Manual]:
Enter the values for the IP address, subnet mask, and default gateway.
 DNS server setting: Select [Auto] or [Manual].
When you select [Auto]:
The unit automatically sets the DNS server.
When you select [Manual]:
The DNS server setting window appears. Specify DNS 1 (preferred DNS server) and DNS 2
(alternate DNS server).
6
When "Switch network settings to manual. " appears, select [OK].
The server selection window appears.
7
Select the name of the server (such as [NAS-S55HDE])* that you want to connect to.
* Server name: This name appears in the [Server setting] menu of the "GIGA JUKE" Music Server.
The connection between the unit and the "GIGA JUKE" Music Server is completed.

Setting up a proxy server manually

You may have to set up a proxy server, depending on the specifications of your Internet provider or the
network settings.
1
Enter the Settings menu and select [Network setting] – [Manual setting] – [Proxy
setting] – [On].
Specify the IP address and port number, and then press and hold ENTER.
2
When "Switch proxy settings. " appears, select [OK].
Note
If after opening the Settings menu no operation is performed for three minutes, the setup is automatically
cancelled. When this occurs, items that were entered are not saved.
20
GB