Displays And Operation - Sony SRP-F300 Operating Instructions Manual

3. DISPLAY AND OPERATION
3-1. Switching DISPLAY MODE
PROGRAM
OUTPUT STATUS
REMOTE / ID
LOCK
On Output level indications
A
LIMITER IN-1
OVER IN-2
-6 HF
-10 MF
-20 LF
-40 SLF
On Output Status indications
A
LIMITER IN-1
OVER IN-2
-6 HF
-10 MF
-20 LF
-40 SLF
You can change the display mode by pressing the DISPLAY button in turn. The
DISPLAY mode indicator shows the current display. (Not available during external
control)
When PROGRAM is lit:
The number display indicates the program number and each output channel
indicator indicates the level at that output.
When OUTPUT STATUS is lit:
The number display indicates the program number and each output channel
indicator indicates output assignment status. It returns to PROGRAM automatically
after 4 seconds.
When REMOTE/ID is lit:
The number display indicates REMOTE ID number and each output channel
indicator indicates the level. It returns to PROGRAM automatically after 4 seconds.
Indicates signal levels of each output after all signal processing.
The indications correspond to the level scale printed at the left side of the indicator .
Indicates simply which output channel is fed by which input channel and the
output frequency range based on the setting of filter cut-off frequencies.
This function helps prevent speakers from being damaged as you can make sure of
each output's status when you operate RECALL or connect an amplifiers and
loudspeakers. The print at the right side of the indicator shows each indication's
meaning as follows:
• IN-1, IN-2
Indicates which input's channel's signal is the sound source. When both
indicators light up, it indicates monomixed signal is the sound source. When
the both lights are off, it means a test signal is used instead of input signal.
• HF, MF, LF, SLF
Indicates the frequency band of each output channel.
HF : High Frequency. Lights up when frequencies of 1kHz or
over are included.
MF : Middle Frequency. Lights up when frequencies of 500Hz-
1kHz are included.
LF : Low Frequency. Lights up when frequencies of 100Hz-
500Hz are included.
SLF : Super Low Frequency. Lights up when frequencies of 100Hz
or less are included.
9